Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Load data that worked for my 9MM

Discussion in 'Handloading and Reloading' started by mwithers72, Aug 25, 2003.

Thread Status:
Not open for further replies.
  1. mwithers72

    mwithers72 Member

    Joined:
    Aug 11, 2003
    Messages:
    328
    Location:
    Nashville, tn
    USE AT YOUR OWN RISK. Neither the writer, The High Road, nor the staff of THR assume any liability for any damage or injury resulting from use of this information.



    I thought that I would post this for anyone that might need it.

    Cal. 9MM
    Powder Type: Bullseye (alliant)
    Case Type Winchester
    Powder weight 5.0 Gr
    Primer Winchester SP
    Bullet Type FMJ
    Bullet Weight 115 Gr.
    OAL 1.120
    good for around 1150 FPS


    Ran throught 50 or so of them and my beretta 92F (9mm) cycled nicely and could hold a tight group at 25 yds. Bullseye seems to be a prity clean powder cause it did not take me long to clean up.

    just my results your may very

    :D
     
Thread Status:
Not open for further replies.

Share This Page