Looking for starting load .23 63Gr FMJBT N133

[Siggie]

Hi reload guru's

I am looking for a starting load or load range using VV N133 powder
behind a 62 Grain FMJBT bullet in a 1/8 twist 16" .223 Semi
(and preferably making the IPSC minor PF for rifles as well ;-) )

I could not find this in the VV/Lapua load data and searching the web did not give some clear data back either. Any input very much welcomed.

 

[Walkalong]

It is interesting that the latest Vihtavuori PDF doesn't show N133 with a 62 Gr FMJ, but there is enough data there, along with enough N133 data in similar calibers, that I could interpolate a starting charge. That my be what you have to do. I have only tried N133 with a 55 Gr FMJ.

 

[Siggie]

Thanks for the interpolation. I will post the results of the chronotest here. (under the usual disclaimer that these are my results and one should verify their on loads and i do not take responsibility for using my tested loads).
I do not have the accurate numbers at hand at this moment (left them at home) but I reached some very nice results.

Again, thanks for your time walkalong. Its very much appreciated and has been helpful in getting me on the right track.

 

[Siggie]

These are the results for the 62 grain reload chrono.
Rifle:
AR15 16" barrel mid length gas system
Load and bullet:
VV N-133 22.5 Gn, CCI SRP, S&B Brass, privi 62Gn FMJBT, light crimp (LFCD)
Chrono Result:
2603fps (or IPSC PF 161 ) avg 10 shots.

So I keep working up a bit to the most comfortable load as the PF is apparently no issue.