Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

M1 Carbine Question

Discussion in 'Rifle Country' started by Nippy, Nov 7, 2004.

Thread Status:
Not open for further replies.
  1. Nippy

    Nippy Member

    Joined:
    Apr 10, 2003
    Messages:
    218
    Location:
    Kern County, CA
    Having the darndest time getting the extractor out.

    It looks like all I have to do is push it out but after moving less then a few millimeters it wont budge. I'm kinda afraid to take a punch to it and wack the extractor out. Am I missing a step here in disassembling the bolt?
     
  2. bbrins

    bbrins Member

    Joined:
    Dec 23, 2002
    Messages:
    216
    Location:
    Maryland
    It is possible to disassemble/reassemble by hand, but trust me, you are much better off buying a bolt tool. If you can manage to push in the ejector and also push in the extractor plunger while taking the third hand you forgot that you had to push out the extractor while not shooting parts all over the room, you have the easy part done. Putting it back together is a lot more difficult.

    You can get the bolt tool HERE.
     
Thread Status:
Not open for further replies.

Share This Page