Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

made a pocket holster for my p3at

Discussion in 'Handguns: Holsters and Accessories' started by Jbabbler, Feb 27, 2011.

Thread Status:
Not open for further replies.
  1. Jbabbler

    Jbabbler Member

    Joined:
    Dec 22, 2008
    Messages:
    807
    Location:
    Atlanta
    Last week I picked up some kydex at a local industrial supply house. It was very inexpensive. For a three 8.5"x11" sheets I paid $8 and some change. I started my first project with it last night. I needed a pocket holster for my P3at. I wanted something that would guard the trigger, have good retention yet be easy to remove if needed. I wanted something that would work IWB or in a pocket. I also wanted the holster to be something that, once installed would stay put if I tossed the gun in my gym bag or computer bag. This is what I came up with.

    The gun snaps in to the holster. It is form fit to the gun and literally clamps around it with the tension of the kydex flexing to allow the gun to snap in and out. The hook serves two purposes. One, when I draw the gun from my pocket in a rearward movement it catches on the pocket and the the gun comes out while the holster stays in the pocket. Secondly, When in the open, I can hold the holster in my left hand with my index finger under the hook and draw the gun with my right.
    p3at-holster6.gif
    p3at-holster5.gif


    The holster is open on the underside of the gun. When snapping the gun in or out the gap you see opens up a bit then closes back.
    p3at-holster4.gif

    Retention is excellent. I can hang the gun from the hook and bounce it without it falling out.
    p3at-holster1.gif

    I wore the holster around today in the pocket of my shorts. I tried it loose and with the clip. I prefer it loose and the shape of the holster kept the gun upright in my pocket. I also switched over to IWB with it for a while and it was perfect for the task. I'll try it in my back pocket as well on Monday.

    All-in-all it took me about 45 minutes to make while I was watching TV with the fam.
     
  2. paramedic70002

    paramedic70002 Member

    Joined:
    Jun 7, 2006
    Messages:
    402
    Location:
    Franklin, VA
  3. Jbabbler

    Jbabbler Member

    Joined:
    Dec 22, 2008
    Messages:
    807
    Location:
    Atlanta
    mucho gracias. It works, that's all that matters to me. I have another idea for one that I'm going to try with some thinner kydex.
     
  4. sam03

    sam03 Member

    Joined:
    Mar 1, 2011
    Messages:
    9
    Look nice!
     
  5. bcp280z

    bcp280z Member

    Joined:
    Feb 3, 2011
    Messages:
    251
    Location:
    Destin, FL
    Forgive my noobness, but how do you make it/form the kydex is it heat activated or so?

    It looks really cool and if it's as easy as you say it is, I'm interested in trying it.
     
  6. jcj

    jcj Member

    Joined:
    May 8, 2010
    Messages:
    13
    You got it. Kydex will become very soft with low heat. A hair dryer is enough to make kydex pliable enough to mold with your hands or preferred instrument. I've made some adjustments to existing holsters, but never made my own from scratch. This one looks like a great example!
     
  7. Jbabbler

    Jbabbler Member

    Joined:
    Dec 22, 2008
    Messages:
    807
    Location:
    Atlanta
    I tried it with a hairdryer and it never got soft enough to mold and hold. I just sat mine on a cookie tray in the oven at 350 for about 4 minutes and shaped it around the gun then I trimmed it out with some tin snips and finished the rough edges with a dremel.

    This is my latest one. I can flip down with my thumb (like a thumb safety) and it will pop off. It also has a hole in the friont that I can loop some paracord through and tie to my belt. Then I drop it in my pocket. When I draw the paracord popps the holster off the trigger guard.


    utf-8BSU1HLTIwMTEwMzAzLTAwNTcxLmpwZw.gif
     
Thread Status:
Not open for further replies.

Share This Page