Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Magnus Bullets ?

Discussion in 'Handloading and Reloading' started by Ala Dan, Mar 24, 2004.

Thread Status:
Not open for further replies.
  1. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    Greeting's All-

    T'was just sitt'in here wondering whats happening at
    MAGNUS BULLETS? I woke up this AM trying to make
    a purchase of their 158 grain L-BBSWC's in .358 dia;
    and my supplier is out! Checked over at the Natchez
    and Mid-South Shooters Supply websites and their
    quanities are very low, completely out, or on order!

    Since I no longer cast my own; and I have to rely on
    materials on a "as needed" basis, I turned to the fine
    folks at ZERO BULLETS of Cullman, AL. Found these
    hard cast bullets at their distrubutor located here:
    ROZE priced at $36.30 with FREE shipping
    and handling for quanities of 1,000 or above.

    Well, I placed my first order with them this PM; and
    if I'm satisfied with the service and product I just
    might make a switch in all other calibers that I now
    handload for?

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
    Last edited: Mar 27, 2004
  2. Third_Rail

    Third_Rail Member

    Joined:
    Jan 10, 2004
    Messages:
    4,981
    Link doesn't work, and it's spelled wrong....


    Can I have the real link now? ;)
     
  3. einnor1040

    einnor1040 Member

    Joined:
    Jul 7, 2003
    Messages:
    199
    Location:
    Middle TN. AKA Smyrnasaki
  4. mparris71

    mparris71 Member

    Joined:
    Dec 27, 2002
    Messages:
    167
    Location:
    WNC
    ROZE
    Think this is where Ala Dan's link was intended to go
     
  5. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    Sorry folk's for posting a bad link! My hats off to
    my friend mparris71 for providing the correct
    link, and covering my butt! :uhoh: :cool: :D


    einnor1040 many thanks for that info, I've
    already added that too my favorites; too bad I
    didn't know about Champion before hand! But
    after looking at the Magnus website, I
    found one of their distributors had vanished with
    not even a trace*, and Bills on Cherry Ave in good
    ole' Bombingham, AL answered the phone and
    informed me that he was out of business! So I
    was getting really angry and upset by this time;
    but still trying to maintain my cool and be a good
    example for The High Road. Then I called Magnus,
    only to get a recording stating that they would
    have a representative contact me later- WOW!
    Just too much to handle~

    *Keith's Hunting & Fishing in Pelham, AL

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
  6. Big Daddy

    Big Daddy Member

    Joined:
    Apr 16, 2003
    Messages:
    117
    I usually don't order from Natchez but have in the past and that is where I discovered Magnus Moly 158g SWC for my .38 & .357 loads. They make some very accurate bullets for some nice loads. At any rate, when I ran out I did not want to order just those bullets from Natchez so I got to looking. http://www.bearcreeksupply.com/ has the exact same bullet with moly for less money than Natchez and they pay shipping on orders over $70. Just another source.
     
  7. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    I checked out the link there Big Daddy my friend and
    it looks like another good source; just as you say!
    Many thanks for that info~

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
  8. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    Correction Request

    For All Viewers:

    My good friend from Missouri blueduck just zeroed
    in on my mistake! :uhoh: I said that product code R-110
    available from ROZE was the 158 grain hard cast .358 "
    diameter L-BBSWC for the .38/.357 When actually these
    are swagged 158 grain L-BBSWC's with the same
    diameter for the .38/.357

    Many thanks blueduck for catching that error; you can
    now move to the head of the class! ;) :D

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
  9. gwalchmai

    gwalchmai Member

    Joined:
    Dec 27, 2002
    Messages:
    477
    Location:
    outside the perimeter
    Kudos to Roze. Great bullets at good prices (they just went up :( ).

    I just went through a thousand of their 124gr 9mm and they shoot like buttah.


    Best part is their receptionists don't have accents. ;)
     
  10. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    I took delivery yesterday of my order from ROZE
    distributors, of the 158 grain .358' diameter .38/
    .357 L-BBSWC's. Don't know yet how they will
    perform; but they look really good. I will report
    back, as quick as I try them out!

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
Thread Status:
Not open for further replies.

Share This Page