Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Marlin X17 or Mossy ATR100

Discussion in 'Rifle Country' started by tnieto2004, Jan 2, 2009.

Thread Status:
Not open for further replies.
  1. tnieto2004

    tnieto2004 Member

    Joined:
    Jan 15, 2007
    Messages:
    1,382
    Marlin XL7 or Mossy ATR100

    Which would be best for deer hunting up to maybe 200 yards? What rifle and caliber? Thanks for the help!
     
    Last edited: Jan 3, 2009
  2. ojibweindian

    ojibweindian Member

    Joined:
    Dec 27, 2002
    Messages:
    2,300
    Location:
    Union Grove, Alabama
    I don't have any experience with the ATR100. I can say that the XL7 I recently bought has been a pleasant surprise. The trigger is nice, and I've got a load for it that shows promise; currently 0.56" at 100 yards.
     
  3. c5_nc

    c5_nc Member

    Joined:
    Dec 11, 2008
    Messages:
    296
    The ATR-100 270 is a popular for deer hunting and it should be, its $249 at walmart which usually stocks it in 270, and excellent flat shooting deer round that is not much to shoot. I have read that they are ~1.25MOA out of the box with proper scope which is enough for deer hunting.
     
  4. stonecoldy

    stonecoldy Member

    Joined:
    Nov 30, 2008
    Messages:
    350
    I purchased the XL-7 from Bass Pro Shops two months ago in .30-06. Price was nice at $280-$290, had a gift card and reward points that knocked it down a bit.
    Not shot yet, but trigger seems smooth and pull not creepy or heavy.
    I believe it is also offered in .25-06 and .270.
    All three are fine for 200 yard taking of deer-sized game.
    I hope to see short actions in 7mm-08 and .308 next season.

    (If you plan to hunt in the northern states, consider buying the .30-06, apparently the deer hides are so thick and tough anything bullet under .30 cal can't penetrate them ;). At least thats was what I was told the first year hunting in Wisconsin. Funny how 130 grain .270 bullets dispel that myth.)
     
  5. rangerruck

    rangerruck Member

    Joined:
    Jan 12, 2006
    Messages:
    8,374
    Location:
    Texas, baby!
    I normally would say the atr, it is a great rifle. That being said, the marlin has too many great features to pass up; solid piece bolt construction, Timney trigger, bbl either made by t/c or green mountain, pillar bedded and very stiff stock. Z figure slide out, on the bolt. i would have to do the marlin just to give it a go...
     
  6. tnieto2004

    tnieto2004 Member

    Joined:
    Jan 15, 2007
    Messages:
    1,382
    Thanks for the input everyone. I think I may make my choice in the morning and go grab one.
     
  7. tnieto2004

    tnieto2004 Member

    Joined:
    Jan 15, 2007
    Messages:
    1,382
    I went with the ATR in .243 and it looks good.
     
  8. Dr. Tad Hussein Winslow

    Dr. Tad Hussein Winslow member

    Joined:
    Nov 14, 2007
    Messages:
    13,146
    Six of one...half dozen of the other.
     
  9. jmr40

    jmr40 Member

    Joined:
    May 26, 2007
    Messages:
    10,091
    Location:
    Georgia
    I found this thread too late but it seems that the Mossberg may have some design problems. At least 3 have recently had the bolt break while firing and come back into the shooters face. Lawsuits have been filed and Mossberg is claiming defective ammo. Google "Mossberg ATR bolt defect" for more info.
     
  10. Dr. Tad Hussein Winslow

    Dr. Tad Hussein Winslow member

    Joined:
    Nov 14, 2007
    Messages:
    13,146
  11. tnieto2004

    tnieto2004 Member

    Joined:
    Jan 15, 2007
    Messages:
    1,382
    jmr do you have a link to that? I tried looking for it but had no luck. Just one about a guys hand getting hurt.
     
  12. Runningman

    Runningman Member

    Joined:
    Dec 10, 2008
    Messages:
    1,230
    Location:
    Northwest
    To bad I did not see this earlier. I was following a thread about bolt failure issues with an ATR firing factory ammo taking out a bunch of teeth last Summer over at Benchrest Central. I don't think I could bring myself to shoot an ATR after reading that thread.
     
  13. Runningman

    Runningman Member

    Joined:
    Dec 10, 2008
    Messages:
    1,230
    Location:
    Northwest
  14. Runningman

    Runningman Member

    Joined:
    Dec 10, 2008
    Messages:
    1,230
    Location:
    Northwest
    Also there was a thread over a 24hourcampfire on this same subject recently.
     
  15. DssG19

    DssG19 Member

    Joined:
    Dec 30, 2008
    Messages:
    24
    Location:
    SoCal
    I have an ATR in 30.06 and there are no issues at all. I don't think that a bolt all the way forward and locked in the down position would somehow fly back and crack him in the grill. IMHO 1. he's a left hand shooter and did not shoulder the weapon properly and the knob smacked him. 2. The bolt wasn't locked all the way in position and somehow the rifle fired. Both of which are shooter error no the the guns fault. Again this is just my opinion. Besides the internet tends to twist stories all over the place, so who knows what really happened.
     
  16. brooks

    brooks Member

    Joined:
    Jul 28, 2003
    Messages:
    105
    Location:
    St.Paul
    I saw some pictures of the Mossberg's blown bolt. I wouldn't buy one and if I had one it would be locked up until the recall.

    Get a Stevens.
     
  17. Schleprok62

    Schleprok62 Member

    Joined:
    Jan 21, 2006
    Messages:
    1,009
    Location:
    Oklahoma City, OK
    Well, let's see... how many ATR1000's are out there in the real world?? I'd guess a bunch... How many incidents are we hearing about??? Less than 10??? I don't know if there's a firearm out there that there hasn't been some kind of incident occur... If it's mechanical, sooner or later, something will go wrong. It could be user error, or it could be mechanical failure, or even mechanical failure due to user error.

    I'm sure Remington, Winchester, Savage, Sako, Weatherby, Marlin, CZ, Browning, etc... pick a manufacturer, have had some kind of malfunction somewhere in their respective business lives... it's a matter of odds... sooner or later, the odds do catch up...

    Cheers...
     
  18. brooks

    brooks Member

    Joined:
    Jul 28, 2003
    Messages:
    105
    Location:
    St.Paul
    The sharks are in the water: This from a Tampa attorney

    My client was injured when his 9 day old Mossberg 100 ATR exploded essentially blowing his face off. Another individual in Louisiana was injured when he shot his 14 day old Mossberg 100 ATR, again essentially blowing his face off.

    Carolyn
    Tampa, Florida
    U.S.A.
     
  19. Antihero47

    Antihero47 Member

    Joined:
    Nov 6, 2008
    Messages:
    30
    Location:
    SoCal - Riverside
    Brooks, how about you post those pictures of the blown bolt. I'm not calling you a liar, but anyone can post erroneous information to back a cause.

    I ask, because I own/owned a Mossberg 100 ATR purchased in October 2008. I have since sold it to my brother, he is using reloaded ammo that I have made for it and used while I was shooting it. While shooting, I never saw any pressure signs, but is something that I want to know more about for the safety and well being of my family.
     
  20. brooks

    brooks Member

    Joined:
    Jul 28, 2003
    Messages:
    105
    Location:
    St.Paul
    Antihero47:

    Well, I am not lying to you and I can't find the thread with the photos right now.

    http://www.cdapress.com/articles/2008/10/25/news/news03.txt

    If you love your brother, have him lock the gun up and call Mossberg. You can do a search too. Key word "injury" and Mossberg ATR.

    The lawyers are smelling blood in the water. They must have advice or are preparing a recall.
     
  21. Beagle-zebub

    Beagle-zebub Member

    Joined:
    Dec 18, 2006
    Messages:
    1,482
    Location:
    Moscow, Russia
    Forget the blown bolts, I wanna see the (former) faces! It's a lot easier to rule out staging of such organic evidence.
     
  22. jmr40

    jmr40 Member

    Joined:
    May 26, 2007
    Messages:
    10,091
    Location:
    Georgia
    Mossbergs are a fairly new gun and relatively few have been made. I'd say having 3 self destruct when being shot is a lot. Look at how many other bolt rifles are out there and I have never heard of this type of problem. Even with barrel obstructions and over charged reloads the barrel or chamber area is what usually gives. The actions usually hold together and do not allow the bolt to come back into your face.
     
  23. Norsecat

    Norsecat Member

    Joined:
    Aug 8, 2005
    Messages:
    26
    Id like to see the blown bolt and ask if any thing was found in the action. Mossberg should be happy to pay the cost of care for such an injury. As a gun maker I would be.
    As a gun smith it should be possible to get new pins and test them for hardness and re temper if needed. The bolt could be welded into one piece. only the lugs need to be tempered so welding behind them wound change that.
     
  24. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    I'm guessing the Marlin or maybe a Stevens 200 is looking pretty good about now.
    Really, more info is needed before passing any judgment on the ATR. Internet rumors are just that.

    NCsmitty
     
  25. paintballdude902

    paintballdude902 Member

    Joined:
    Jun 30, 2007
    Messages:
    2,872
    i love my xl7 in .30-06 a bit more money but its worth it the marlin just looked alot better and felt alot better to me

    the trigger is great and can be taken way dont
     
Thread Status:
Not open for further replies.

Share This Page