Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mauser dove tail help.

Discussion in 'Gunsmithing and Repairs' started by chromerunner, Feb 8, 2013.

Thread Status:
Not open for further replies.
  1. chromerunner

    chromerunner Member

    Joined:
    Jun 17, 2009
    Messages:
    59
    Location:
    NC
    I picked up this Bubba mauser and i cant seem to figure out what is going on with the Dovetail cut out? Not even sure thats what it would be called...Can someone ID what is/was going on here and why this would have been done. Thanks

    100_2856_zps44a340ff.jpg
    100_2857_zpsc31c854b.jpg
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Somebody milled a dovetail slot in it to fit some goofy scope base that wasn't for a Mauser receiver.

    rc
     
  3. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,565
    Bubba probably took off a European claw scope mount for which rings are essentially unavailable.
    It was usual to cut that huge dovetail into the receiver ring for the front base. The rear base was screwed or soldered down and he got that off without having to plug a hole.
    Then he drilled and tapped the receiver for Weaver bases, one screw hole going into his monster dovetail filler block.

    I have not seen one of these to fail in use, but that sure looks like a lot of metal gone out of a stressed area, the receiver ring over the top locking lug recess. But the Germans et al got away with it on a lot of rifles.
     
  4. Clark

    Clark Member

    Joined:
    Jan 3, 2003
    Messages:
    4,341
    Location:
    Where I5 meets the rain forest
    [​IMG]

    It took me 5 seconds with Google to find this picture on some European forum
    http://www.warrelics.eu/forum/firearms-ordnance/waffen-ss-double-claw-mount-98k-sniping-rifle-17821/

    I have been sporterizing Mausers for 47 years.
    I have always managed to attach scopes with less invasive surgery.

    But the best deals I get on Mausers are when someone has tried to mount a scope and failed. Rather than drill more holes, I try to live with the mods already done tot the receiver and instead make custom mounts.
     
  5. 4v50 Gary

    4v50 Gary Moderator Staff Member

    Joined:
    Dec 19, 2002
    Messages:
    18,798
    Like Clark said, your gun was scoped once. I have one just like that, but the wedge is well fitted and there's a German proofmark over mine. According to my instructor, it was scoped before WW I (thanks to the 1920 proofmarks).
     
  6. rbt50

    rbt50 Member

    Joined:
    Dec 26, 2006
    Messages:
    44
    that was done by mausers and used on some of their sinper rifles for the ss.not all made it to the ss.it would need those marking on the reciver.
     
Thread Status:
Not open for further replies.

Share This Page