Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

"Melted" Treatment for Springfield 1911 Loaded?

Discussion in 'Handguns: Autoloaders' started by JJNA, Mar 20, 2013.

Thread Status:
Not open for further replies.
  1. JJNA

    JJNA Member

    Joined:
    Nov 2, 2004
    Messages:
    239
    Location:
    NoVA
    I have an older Springfield 1911 "Loaded" -- from the days when this model was made with staked on front sight and the edges were extremely sharp.

    A while back when I lived elsewhere I had the edges softened somewhat by a local, no-name gunsmith. I haven't used the gun much, but I am now interested in shooting the 1911 more and possibly carrying it.

    I noticed that the gun wreaks havoc on the inside of my leather holster (Mitch Rosen Premier) and is not exactly pleasant to handle either. I am thinking about getting a "carry melt" done.

    First of all, is this advisable? Would it affect the integrity of the metal/parts at all? Also, to which gunsmith should I send it? I live in Northern Virginia -- is there any local gunsmith who is capable of this kind of edge beveling?
     
  2. tarosean

    tarosean Member

    Joined:
    Oct 22, 2010
    Messages:
    5,312
    Location:
    TX
  3. falmike

    falmike Member

    Joined:
    Feb 12, 2005
    Messages:
    103
    Location:
    Fort Hood, TX
    I had a Commander with the Clark Custom meltdown. It was sweet!

    That is one of only a few guns that I regret selling! They do great work.

    Mike
     
  4. WC145

    WC145 Member

    Joined:
    Oct 28, 2006
    Messages:
    2,259
    Location:
    Maine
    I haven't had any issues with strength/integrity of any part of my gun and it's got a pretty radical melt. Clark's is the place to go for that sort of work but you'll have to call and check with them, they had cut back on the 1911 work they were taking in. I've had Dietrichs break do a carry bevel on a couple guns and they've done a great job, you might call them and ask Robin what he thinks about doing more of a "melt". He's intimately familiar with my Compact so he'll know what your looking for.
     
  5. JJNA

    JJNA Member

    Joined:
    Nov 2, 2004
    Messages:
    239
    Location:
    NoVA
    Does anyone know a good gunsmith who might be able to do this kind of treatment in Northern Virginia?
     
  6. WC145

    WC145 Member

    Joined:
    Oct 28, 2006
    Messages:
    2,259
    Location:
    Maine
    Nope. But you can also check with Chuck Rodgers, he does a melt on his guns that really rounds the corners and looks very cool and unique.
     
Thread Status:
Not open for further replies.

Share This Page