Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Meplat trimming & Tipping

Discussion in 'Handloading and Reloading' started by zfk55, Jan 30, 2010.

Thread Status:
Not open for further replies.
  1. zfk55

    zfk55 Member

    Joined:
    Dec 7, 2009
    Messages:
    299
    Location:
    Lost Prairie Montana
    Other than Benchresters, who's doing it regularly these days? What caliber and at what distances are you shooting? It seems to be the next step for us but its a pretty good investment for the right trimmer and dies.
    Any suggestions for a brand name? I'm thinking about Hoover for a trimmer.
    Thanks

    zfk55
     
  2. Afy

    Afy Member

    Joined:
    Dec 31, 2006
    Messages:
    2,595
    When you get into the .3's consistently on bad days, and start hitting .1's on good and generally shoot a consistent >.25 all day long. Start worrying about this. Until then go and shoot.

    Get to a consistent .25 or better... concentrate on that, thechnique over gizmo's. My .00000000000002 cents adjusted for inflation.;)
     
  3. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    45,639
    Location:
    Alabama
    Absolutely.
     
Thread Status:
Not open for further replies.

Share This Page