Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mini 14 question?

Discussion in 'Rifle Country' started by pwillie, Jan 12, 2013.

Thread Status:
Not open for further replies.
  1. pwillie

    pwillie Member

    Joined:
    May 24, 2008
    Messages:
    524
    Location:
    Lower Alabama
    I got a call tonight from a friend in N.C.,and he asked me if I knew anything about an accurizer for the Mini 14? Is there anything called a "HAR-R" ? I think he is looking for some type of harmonic balancer...Help!:banghead:
     
  2. carbine85

    carbine85 Member

    Joined:
    Jul 1, 2007
    Messages:
    2,110
    Location:
    Southwest, Ohio
  3. Cal-gun Fan

    Cal-gun Fan Member

    Joined:
    Jul 9, 2010
    Messages:
    1,164
    Location:
    Utah/California
    I've got an accu-strut on my 586 series mini 14, and it works very well, probably tightened my groups at least an inch. (2.5 inches to about 1-1.5 now). Very easy to install.

    There are several brands out there of these now. The two I know of are the Accu-Strut, which was the original, and the Har-Bar. The Har-Bar, last time I checked, charges way more, doesn't look as nice, and does the same thing. So I'd go with the accu-strut.
     
  4. mberoose

    mberoose Member

    Joined:
    Feb 5, 2012
    Messages:
    338
    Location:
    CT
    I have an Accu-Strut LT on my 185-series (1987) Mini-14, it makes a difference.
     
  5. M1key

    M1key Member

    Joined:
    Oct 18, 2007
    Messages:
    2,449
    Location:
    SW
    I think he was referring to the Har Bar

    http://www.rogco.biz/

    M
     
  6. pwillie

    pwillie Member

    Joined:
    May 24, 2008
    Messages:
    524
    Location:
    Lower Alabama
    Thanks fellows,I think this what he was asking about....Willie:D
     
  7. Skyshot

    Skyshot Member

    Joined:
    Jan 23, 2011
    Messages:
    936
    Location:
    Tn.
    Accu-strut, Har-Bar, Mod-Rod and True Shot Technologies are barrel stabilizers that mount to the gas block and consist of one or two barrel clamps depending on barrel length. You can also make your own for not much money. They work very well. You hear a lot of people talk about how bad the accuracy is of the Mini-14 and rightly so with some of the older models. But this mod will do wonders for the older pencil barrel minis. I have one of the new 581 series with the 16 inch barrel with a stabilizer and it will shoot the 62gr 855 ball ammo inside of 1 1/2 inches at 100 yards.
     
  8. pwillie

    pwillie Member

    Joined:
    May 24, 2008
    Messages:
    524
    Location:
    Lower Alabama
    I ordered one for him today,thanks again...
     
Thread Status:
Not open for further replies.

Share This Page