Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Model 27-2 and first range trip

Discussion in 'Handguns: Revolvers' started by 4D5, Jul 5, 2010.

Thread Status:
Not open for further replies.
  1. 4D5

    4D5 Member

    Joined:
    May 21, 2004
    Messages:
    265
    Location:
    Nevada, Carson Valley
    I was at one of the pawn shops I check regularly and about a month ago and the gun guy said he has a S&W revolver coming out in about a month, but no details.

    Well I went by to check it out a few days ago and it was a 27-2 in really good condition except for the grips. It came with a display box (not sure it’s original S&W maybe someone could help me out with this) screwdrivers and cleaning rod and the label from the box. I could see tape on the case that matched the label in the box under the felt.

    We haggled quite a while over price and finally met in the middle and it came home with me :D

    After I got it home I took the grips off and checked them as they were a little lose. The grips were in a little worse shape that I though after seeing them in the daylight. I discovered the reason that the grips were loose is because the stock roll pin in the bottom of the frame was missing and in its place was a cut off piece of clothes hanger :what:

    I decided that the grips would need some TLC so I gave them a light sanding with 220 and 400 grit sandpaper followed by 0000 synthetic steel wool. I taped the medallions and gave the grips a coat of spray clear gloss urethane and they turned out really good in spite of the original condition.

    I replaced the stock roll pin and will replace the side plate screws. Someone got carried away with polish and removed quite a bit of the blueing on the screw heads.

    I stripped it down completely and disassembled everything. It really needed it. Most of the action was bone dry and the yoke/cylinder/ejector had a huge amount of dried caked grease/powder/crud.

    I removed the tape/residue on the display box and gave it a good cleaning with Murphy’s oil soap. It also cleaned up nicely. The flocking has some dirty spots and is broken in places. If it turns out to be original S&W display box, I’ll have it re-flocked.

    Took it out today for the first range trip (fitting for the 4th) and here’s the pictures.


    S&W 27-2
    DOB ~ 1977
    Pinned & Recessed
    Blued
    Target hammer
    Target trigger
    357 mag
    8 3/8” barrel


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. ACORN

    ACORN Member

    Joined:
    Oct 24, 2003
    Messages:
    538
    Location:
    "The shining city on a hill"
    I has one back in the seventies exactly the same as yours. I sold it and have trying to find another. It is my "white whale". Nice looking revolver. Mind my asking what you paid for it? The price of them seems to be shooting up!
     
  3. lonegunman

    lonegunman Member

    Joined:
    Nov 2, 2005
    Messages:
    378
    Location:
    pac nor west
    It shots farther, a seven yard group is not that far. That is like a 15yd group from a 30-06.
     
    Last edited: Jul 5, 2010
  4. Iggy

    Iggy Member

    Joined:
    Dec 24, 2002
    Messages:
    3,011
    Location:
    Wyoming
    You sure didn't get hurt on that one.
     
  5. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    Very nice!
     
  6. Radagast
    • Contributing Member

    Radagast Moderator Staff Member

    Joined:
    Dec 24, 2002
    Messages:
    8,148
    Location:
    Australia/OZ
    4D5: That is a correct S&W case for that gun from that period.
     
  7. 4D5

    4D5 Member

    Joined:
    May 21, 2004
    Messages:
    265
    Location:
    Nevada, Carson Valley
    ACORN:

    I had to bargain hard but I got it for $575.
     
  8. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    You little felon you. :evil:

    Very good price these days.
     
  9. 4D5

    4D5 Member

    Joined:
    May 21, 2004
    Messages:
    265
    Location:
    Nevada, Carson Valley
    LONEGUNMAN:

    Yep it will definitely shoot further than 7 yards, but this was the first trip out and I had others that I did work on and wanted to test them as well so I didn't spend a lot of time with each. Plus I didn't want to walk to the target and back so many times as it got hot early and I called it a day early.

    I forgot to put on the target picture that that was 6 rounds.
     
  10. 4D5

    4D5 Member

    Joined:
    May 21, 2004
    Messages:
    265
    Location:
    Nevada, Carson Valley
    Radagast:

    Thanks for the info on the case. I initially suspected it was an original. A reply on another site also confirms it is appears to be an original.
     
  11. Jon Coppenbarger

    Jon Coppenbarger Member

    Joined:
    Dec 25, 2002
    Messages:
    1,281
    Location:
    co
    Very nice pistol you have. I love mine as far as the 27 goes I have two pre 27's with the S prefix diamond grips and all, one in 3 1/2" and one in 6".

    again nice find.
    jon
     
Thread Status:
Not open for further replies.

Share This Page