Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Montana Gold/380/Low on powdr.

Discussion in 'Handloading and Reloading' started by lauderdale, Nov 21, 2013.

Thread Status:
Not open for further replies.
  1. lauderdale
    • Contributing Member

    lauderdale Member

    Joined:
    Jun 17, 2013
    Messages:
    693
    Location:
    TN.
    Been reading for and hour now on 380, and see that folks that reload MNT. Gold, like w231 the Most. orderd 95gr. JHP,as a lot of folks seem to like for target. I,am down to Bulls eye,titegroup,and 4lb of 800x Hi-Skor. Found just a few that used tite grp. any Reload w/any of these 3 pwdrs. by any chance?
     
  2. jwrowland77

    jwrowland77 Member

    Joined:
    Apr 8, 2012
    Messages:
    2,293
    Location:
    Central Arkansas
    I load .380 with Titegroup, just not the Montana Gold bullets.

    I personally like TG in my .380 loads. I use Berrys and Rainier bullets.
     
  3. Schwing

    Schwing Member

    Joined:
    Jun 3, 2013
    Messages:
    2,081
    Location:
    Layton Utah
    I reload most of my .380s with Bullseye. I use 100 grain LRN though so you will have to look up load data. I know there is published data for your bullets with bullseye. If you go to IMR's website, believe it or not, they have published load data for .380 with 800x as well.... I would hand weigh every charge with 800x but it can be done.
     
  4. Potatohead

    Potatohead Member

    Joined:
    Mar 9, 2013
    Messages:
    5,370
    Yea, Ive loaded 800x in 380 i believe. Jacketed bullets though. I think their is a recipe in the 380 Lee die instructions if im not mistaken
     
  5. lauderdale
    • Contributing Member

    lauderdale Member

    Joined:
    Jun 17, 2013
    Messages:
    693
    Location:
    TN.
    Thanks fell'as not much as I thought, potatoehead those are jacketed.
     
  6. BYJO4

    BYJO4 Member

    Joined:
    Nov 28, 2010
    Messages:
    1,776
    Bullseye should give you good loads.
     
  7. DanTheFarmer

    DanTheFarmer Member

    Joined:
    Sep 24, 2010
    Messages:
    379
    Location:
    New Hampshire
    I use Bullseye with good results for my 380 ACP loading. I use the Lee Auto-Disk system and I don't have a small enough disk choice to use Titegroup.

    FYI - I also had decent results with Power Pistol in the 380. I'll use that as my backup powder.

    Dan
     
  8. lauderdale
    • Contributing Member

    lauderdale Member

    Joined:
    Jun 17, 2013
    Messages:
    693
    Location:
    TN.
    Thank u Dan.
     
Thread Status:
Not open for further replies.

Share This Page