Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

more fixtures part 2

Discussion in 'Gunsmithing and Repairs' started by marklav111, Nov 21, 2012.

Thread Status:
Not open for further replies.
  1. marklav111

    marklav111 Member

    Joined:
    Nov 11, 2012
    Messages:
    22
    more fixtures part 2
     

    Attached Files:

  2. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,425
    Location:
    Piney Woods of East Texas
    First one is a sear/hammer jig.
     
  3. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,923
    Location:
    Alabama and Florida
    Pic 1 - Power Custom Series 1 stoning fixture. The small round object on the upper left with two pins is an adaptor for a specific hammer/sear. Should have an identifying mark on it to indicate which gun it is for. A 1/2" x 1/2" x 6" stone is used with it. The roller (and one roller guide pin) that lays in the groove on top of the right "tower" appears to be missing. Current price new is $150 for the jig w/ one adaptor. Adaptors are $26 each separately.
    Pic 2 - The blued object on the left is (I think) a hammer spring tool for a Hi Standard 22 pistol. No clue on the silver colored tool.
     
    Last edited: Nov 21, 2012
Thread Status:
Not open for further replies.

Share This Page