Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

More unknown fixtures

Discussion in 'Gunsmithing and Repairs' started by marklav111, Nov 20, 2012.

Thread Status:
Not open for further replies.
  1. marklav111

    marklav111 Member

    Joined:
    Nov 11, 2012
    Messages:
    22
    Howdy,

    I am back with a few more fixtures that came from the Gunsmith estate that I recently purchased and was hoping for some input again. These 5 fixtures were in a box and I am not familiar with them, any advice would be appreciated. There are still a few more I need to photograph. Thanks You, Mark
     

    Attached Files:

  2. marklav111

    marklav111 Member

    Joined:
    Nov 11, 2012
    Messages:
    22
    2 more pictures

    two more photos
     
  3. N.Schafer

    N.Schafer Member

    Joined:
    Jul 9, 2009
    Messages:
    210
    Location:
    Waterville, MN
    First is a firing pin disassembly jig. Probably for a Rem 700. The shroud, firing pin, spring assembly screws in one side and you compress it with the other screw. Then punch out the pin in the cocking piece.

    Second is a sight pusher.
     
  4. AlexanderA

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,055
    Location:
    Virginia
    The second one's a dovetail front sight blade pusher.
     
  5. ApacheCoTodd

    ApacheCoTodd Member

    Joined:
    Jun 30, 2011
    Messages:
    4,606
    Location:
    Arizona
    Wow two that are identifiable. Posts 3&4 nailed 'em. A fella can still buy number one for under 30 bucks.
     
  6. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,893
    Location:
    Alabama and Florida
Thread Status:
Not open for further replies.

Share This Page