Mosin Nagant 91/30 Question

[dispatch55126]

How do you remove the center bolt on the MN 91/30 first picture. I'm planning on refurbishing the stock due to the laquer coming off in several areas and dents/dings in the wood second picture.

 

[B yond]

That's a stock recoil bolt and nut assembly. Instructions for removing it are here: http://7.62x54r.net/MosinID/MosinDisassembly.htm

 

[Cosmoline]

Keep in mind, most Soviet 91/30's have notoriously tricky crossbolts. They are sometimes all but impossible to remove without scratching them. If it's stubborn apply some break free to the threaded end. Use brass punches to knock out the main piece.

 

[dispatch55126]

If I do scratch, damage or otherwise due something stupid, how hard is it to find a cross bolt or (hope not) lower stock?

 

[Cosmoline]

It's an easy part to replace, but you may have a hard time fitting it. Also, keep in mind that if your refinishing involves building layers of tru oil or similar polymer finish on the wood, you will end up with a hole too small for the piece! That's one reason I prefer BLO.

 

[Zeke Menuar]

I've refinished four of my Mosins. Tape off the crossbolt and leave it in. If it isn't broke, don't fix it.

ZM