Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mossberg 930 SPX Magazine Follower

Discussion in 'Shotguns' started by deolexrex, May 3, 2010.

Thread Status:
Not open for further replies.
  1. deolexrex

    deolexrex Member

    Joined:
    May 2, 2006
    Messages:
    166
    Location:
    Central, IL
    I recently purchased a couple SPX's and have found the magazine follower to be a problem.

    I'm looking for replacement suggestions.

    Thanks!
     
  2. Al LaVodka

    Al LaVodka member

    Joined:
    Sep 9, 2009
    Messages:
    1,040
    Problem? How!? And is this AFTER they give you the upgraded spring...
    Al
     
  3. deolexrex

    deolexrex Member

    Joined:
    May 2, 2006
    Messages:
    166
    Location:
    Central, IL
    The follower binds and doesn't always let the next round load.

    Upgraded spring? Tell me more...
     
  4. bkjeffrey

    bkjeffrey Member

    Joined:
    Aug 12, 2007
    Messages:
    753
    Location:
    Southern states
    Yes, I too am interested in the upgraded spring.

    As far as the follower Ive never had any trouble out of mine, but any aftermarket follower should work, possibly better than the one it came with.
     
  5. Narwhal

    Narwhal Member

    Joined:
    Feb 8, 2010
    Messages:
    240
    Here is the definitive thread on the 930 SPX:

    http://www.weaponevolution.com/forum/showthread.php?167-Mossberg-930-SPX-Review

    Post #5 in the above link discusses magazine followers. He uses this follower from S&J Hardware:

    sjfollower.jpg

    It appears to be designed for an 870; any 870 follower will probably work. Unfortunately it is longer than the factory follower and will therefore reduce your magazine capacity by 1 round. Personally I use the factory magazine follower and spring and have not experienced any binding issues.
     
Thread Status:
Not open for further replies.

Share This Page