Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mounts for Remington 700

Discussion in 'Rifle Country' started by Yankee, Jan 31, 2011.

Thread Status:
Not open for further replies.
  1. Yankee

    Yankee Member

    Joined:
    Jul 7, 2008
    Messages:
    110
    Location:
    Southern Australia
    After many years of dreaming, I finally purchased a new Remington 700 Police which I plan to use mainly for puching holes in paper at the 200-600 yard range. I stretched the budget to include a Timney trigger and I already have a Harris bipod that I plan to mount it on. My next task is to choose some mounting hardware for optics. I ultimately want a high-end Leupold but the budget won't stretch that far right now so I plan to just use an old Tasco 3-9x40. My question is, what sort of optics base should I use? Is there any good reason to go out and buy a top grade picatinny rail and if not, what sort of bases should I get? What I really want is a long term solution, something rock solid that I can just install and forget about and which won't cause problems some point down the road. Cost isn't as important to me as reliability and durability.
     
  2. edporch

    edporch Member

    Joined:
    Jan 26, 2011
    Messages:
    13
    Location:
    Fishers, Indiana
  3. hoghunting

    hoghunting Member

    Joined:
    Feb 16, 2006
    Messages:
    1,597
    I put a Near Manufacturing 20 MOA base on a 700, and was extremely impressed with the quality and workmanship of the base. While not inexpensive, you definitely get what you pay for.

    http://www.nearmfg.com/
     
  4. Rem700SD

    Rem700SD Member

    Joined:
    Dec 8, 2005
    Messages:
    541
    Location:
    South of Houston, TX
    Other brands to consider are Nightforce and Leupold Mark 4 series.
     
  5. TexAg

    TexAg Member

    Joined:
    May 31, 2005
    Messages:
    781
    Talley. But it really doesn't matter much until you replace that Tasco. There is quality, lifetime warranty glass out there for not much, but not Tasco!
     
  6. Lloyd Smale

    Lloyd Smale Member

    Joined:
    Jan 23, 2003
    Messages:
    1,949
    Location:
    Munising MI
    id opt for a standard one piece base for leupold/redfield style rings. there plent stout enough and allow you to get your windage close so you can center the windage adjustment in your scope.
     
  7. Geno

    Geno Member

    Joined:
    Jun 11, 2005
    Messages:
    14,847
    I have the M700 Police in .308 Win. Believe me when I say that the rifle itself, is not the expensive part of the package...it is merely the beginning. The total additional cost for a good M1913 base, rings and scope can easily run double the cost of the original rifle.

    For bases, I suggest either Farrell base with 20 MOA offset. Here is a link:

    http://www.kenfarrell.com/REM-700S-1-20.html?id=LkevaSrQ

    The following is a link for a nice, budget-minded scope:

    http://swfa.com/SWFA-SS-10x42-Tactical-Riflescope-P499.aspx

    For rings, I would go either Leupold Mark 4, or Nightforce steel.

    Geno
     
  8. USSR

    USSR Member

    Joined:
    Jul 7, 2005
    Messages:
    8,391
    Location:
    Finger Lakes Region of NY
    Yankee,

    There are a lot of good picatinny rails available for the M700. Most of my rifles wear Badgers, but they are somewhat expensive. Aside from the others mentioned in previous posts, here is another one to look at:

    http://www.tacticalprecision.com/

    I would highly recommend that whatever rail you end up going with, that you get one with a 20MOA incline built into it. I was in your situation once after buying a precision rifle and not having a lot of $$$ leftover for the Leupold scope that I wanted. I ended up buying the Bushnell 10x40 mildot scope for about $160 to serve until I had more money for the Leupold. It is a good scope for the $$$.

    Don
     
  9. Yankee

    Yankee Member

    Joined:
    Jul 7, 2008
    Messages:
    110
    Location:
    Southern Australia
    Thanks gents - I'm pretty sure that I'm going to go with the Badger Ordinance although the Leupold Mark 4 gets excellent reviews as well. If I'm going to go for a Leupold scope, will I have any dramas if I use another brand of bases and/or rings?
     
  10. Legionnaire

    Legionnaire Member

    Joined:
    Dec 24, 2002
    Messages:
    4,070
    Location:
    Texas
    Nope, no drama. My Leupold sits in Badger rings just fine.
     
  11. 52grain

    52grain Member

    Joined:
    Jun 21, 2009
    Messages:
    664
    Definitely get a Picatinny rail with some elevation adjustment. Assuming that your tasco has at least 40 MOA of internal adjustment, get a base with 20 MOA of adjustment. There are plenty of models out there.

    When the time comes to get a new scope look at the Leupolds, but also look at the Zeiss Conquest. For those ranges, be sure to get something with paralax adjustment.
     
  12. NeuseRvrRat

    NeuseRvrRat Member

    Joined:
    Jan 24, 2011
    Messages:
    2,098
    Location:
    Wilmington, NC
    get a Dednutz by DNZ Products. i don't think you'll find a more solid mount.
     
Thread Status:
Not open for further replies.

Share This Page