My 1st 750 XL! (used) !!! 😊

Mark_Mark

Contributing Member
Joined
Jan 9, 2021
Messages
21,715
Ok… was at a strange shop in Seattle area and this showed up! One of my New Years Resolutions was to get a Dillion 750 XL! I knew it was going to cost me a Arm + Leg because they don’t include the conversion kit with the standard 750XL base model.

Anyway! it has 2 heads, one for .45 and 1 for 9mm. Very Very good condition, a black box with wires and tools with holder in the back!

$599 for the 750 XL
$50 for the Hornedy scale + powder drop

Hope I did GOOD!

IMG_3461.jpeg IMG_3462.jpeg IMG_3463.jpeg IMG_3464.jpeg IMG_3465.jpeg IMG_3466.jpeg IMG_3467.jpeg
 
I purchase a 550 late fall. $299 and I thought I got a good deal.
$299 for a 550! I would have jumped on that

story behind this one was… reloader/shooter died and the family packaged up his unwanted stuff and sold it to the shop. Look to have dillon + hornedy dies, a powder check, and maybe a case feed!

I just got back last night from a Cruise. I’ll mount it later this week and see how it loads.
 
That’s a great deal! I love my XL750 I have some upgrades ive done to mine I’ll have to share
once I shake off this Cruise Boat trip, I’ll take more detail photos! looks like there was once a case feeder

I like the Hornedy digital scale + powder drop. Never tried both. I put a low ball offer of $40 for it, they wanted $100… Shop owner came back at $50. Think they just wanted that reloading stuff out their shop.
 
Very nice! Those accessories are great - they do cost a bit new, looks like you got a great deal!
A late merry Christmas to me?
It was my New Year’s resolution to get a XL750 with all the trimmings, and only cool guns that are Super Discount Deals and shoot more!

Starting off good here! THANKS! and Merry Christmas to you too!
 
View attachment 1244897
What is this thing on the case feed?
Looks like the previous owner may have been using a 3D printed case feeder. Lots of designs have a ramped feed like that so on the up stroke the spring on the case feeder slides the case “shuttle” to the hole above and drops in. Then on the down stroke the projectile “shuttle” then returns to collect another case from a drop tube connected to a collator.
 
Looks like the previous owner may have been using a 3D printed case feeder. Lots of designs have a ramped feed like that so on the up stroke the spring on the case feeder slides the case “shuttle” to the hole above and drops in. Then on the down stroke the projectile “shuttle” then returns to collect another case from a drop tube connected to a collator.
that what it does!

there was also still powder in the drop and primers in the tube. I just wonder what the story behind this press. Did the family just take the whole thing in the shop?
 
Ok… was at a strange shop in Seattle area and this showed up! One of my New Years Resolutions was to get a Dillion 750 XL! I knew it was going to cost me a Arm + Leg because they don’t include the conversion kit with the standard 750XL base model.

Anyway! it has 2 heads, one for .45 and 1 for 9mm. Very Very good condition, a black box with wires and tools with holder in the back!

$599 for the 750 XL
$50 for the Hornedy scale + powder drop

Hope I did GOOD!

View attachment 1244562View attachment 1244563View attachment 1244564View attachment 1244565View attachment 1244566View attachment 1244567View attachment 1244568
Very nice
 
Now you need to find another strange shop that has a case feeder 😜

They are so worth it. Huge time saver.
I seen they had the multi tube feeder thing. Looks like a Dillion Machine gun tubes l, just plastic. be that would work
 
Back
Top