Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My first AR15 build - pretty pictures!

Discussion in 'Rifle Country' started by malakili, Dec 31, 2011.

Thread Status:
Not open for further replies.
  1. malakili

    malakili Member

    Joined:
    May 13, 2009
    Messages:
    180
    Location:
    Brevard
    Hi, all. I finally decided to take the plunge and do an AR build project. I haven't owned an AR for a while and I missed 'em, so I chose to reacquire one this way. I really like the full size A2 style rifles, but the theme for this build is "practical/versatile", so I went with a 16" barrel and collapsible stock. That way it can be better used for HD if need be, and also more easily used by wife, daughter, or nieces that may come to the range with me.
    I just completed it last night, lower receiver assembly went real easy. Expect a range report when I have the chance to blow up some ammo.

    Here's my parts list:

    Del-Ton complete Mid-length upper, 16" 1/9 barrel ($400 on Midway)
    CMMG stripped lower ($99 locally)
    Palmetto State Armory Classic LPK ($45 on PSA website)
    UTG US-made Milspec stock assembly ($43 on Amazon.com)
    Magpul MBUS rear sight ($55 from PSA)
    Magpul PMAG in flat dark earth ($14.20 from Midway)

    DSC_0245.jpg
    Starboard side with collapsed stock. I love the look of the Midlength style rifles, and I hear great things about their performance. Soon to find out!

    DSC_0248.jpg
    Port side, extended stock.

    DSC_0247.jpg
    Detail of MBUS rear sight and buffer tube. I like the MBUS, it seems really strong so far, and I prefer a windage only rear. I staked the castle nut to keep it from loosening, per build instructions I read. Also applied threadlocker to buffer tube threads. I used Midwest Industries stock wrench, got it for $6.99 from PSA. Good sturdy wrench.

    DSC_0249.jpg
    Del-Ton bolt carrier group. Well-staked gas key!

    DSC_0250.jpg
    Bolt is made from Carpenter 158 steel and HPT/MPI tested per milspec.

    DSC_0252.jpg
    MBUS sight picture. This rifle is so well-balanced and fits me so good. Transition from low ready to acquired sight picture is so fast it's almost telepathic.

    Hope you guys like! I plan to put lots and lots of ammo through this thing and test it out good. I have 100 rounds of Federal .223 and 1 pmag right now, and have 2 more pmags and 100 rounds of Fed 5.56 on order. A decent start.
     
  2. CmdrSlander

    CmdrSlander Member

    Joined:
    Jun 28, 2011
    Messages:
    1,203
    Location:
    Disputed Western Missouri
    Well done sir. Sweet AR-15, may I recommend an MOE kit when you have the time/money, makes the rifle look and feel a good bit better (only about $80 for a new handguard, pistol grip, and stock in the color of your choice). I believe the mid length is softer shooting than carbine length, has that been your experience?
     
    Last edited: Dec 31, 2011
  3. ugaarguy

    ugaarguy Moderator Staff Member

    Joined:
    Mar 19, 2006
    Messages:
    12,069
    Very nice first build. It's good to see photos showing that Del-Ton has listened to their customers & stepped up their game as claimed. I like the very proportional looks of the 16" bbl with middy gas system. Good job!
     
  4. USAF_Vet

    USAF_Vet Member

    Joined:
    Jan 6, 2011
    Messages:
    5,773
    Location:
    Hastings, Michigan
    Nice looking rifle. I too prefer the mid length over the carbine. Just a hair over $650 counting the mag, not a bad score. I also think it looks good as it is, no real need for anything else. Looking forward to hearing how it shoots.
     
  5. kfgk14

    kfgk14 Member

    Joined:
    Jan 1, 2011
    Messages:
    248
    I'm amazed about the mil-spec BCG, though I'd personally also spend the $100 for a spare BCG from Palmetto State Armory (I have one for all my rifles, good investment as a just-in-case). Is the barrel 4140 or 4150?
     
  6. ms6852

    ms6852 Member

    Joined:
    Oct 19, 2009
    Messages:
    1,531
    Location:
    TEXAS
    Congratulations, nice job on your build.
     
  7. sgtstryker

    sgtstryker Member

    Joined:
    Dec 24, 2011
    Messages:
    401
    Location:
    Southwest Georgia
    Nice carbine, should shoot as well, too. I've been trying some Promags, they work pretty good. Did you try any trigger work while you were at it?
     
  8. malakili

    malakili Member

    Joined:
    May 13, 2009
    Messages:
    180
    Location:
    Brevard
    I'll probably stick with the GI furniture, I'm pretty happy with the look/feel as is. I'm thinking of maybe wrapping some cushy grip tape around the pistol grip though. Not sure what the recoil will be like, I've only fired carbine and rifle types previously.

    The BCG isn't completely milspec, Del-Ton still uses the semi-auto carrier rather than the heavy duty full auto type. I may upgrade to a Bravo Company full auto carrier at some point in the future, but I'm not concerned about it right now. Not sure if the barrel is 4150, they don't make it too clear on the Del-Ton website. There's a 16" 1/7 carbine upper that's listed as 4150, but it's not specified either way on any of the other uppers. I may have to email them on that one.

    I'm pretty religious about the pmags, they've worked so good for me I'm hesitant to try anything else. Didn't work on the trigger, it's a bit creepy right now but I'm just gonna let it smooth up with use.
     
  9. HOLY DIVER

    HOLY DIVER Member

    Joined:
    Jan 1, 2008
    Messages:
    1,057
    Location:
    spartanburg,SC
    congrats on your first build! you will love that mid-lenghth gas system. is the barrel chrome lined?
     
  10. malakili

    malakili Member

    Joined:
    May 13, 2009
    Messages:
    180
    Location:
    Brevard
    Holy Diver, this one isn't chrome-lined. Del-Ton offers it as an option if you order direct from them, but the $400 complete upper Midway USA sells isn't the chrome-lined variety.

    It doesn't bother me, religiously maintaining barrels is an ingrained habit for me anyway. :)
     
  11. Cecil Sharps

    Cecil Sharps Member

    Joined:
    Mar 4, 2011
    Messages:
    78
    Location:
    A secret underground bunker
    grip tape alternative

    get a foot of type III nylon.(550 cord)

    Wrap it around the pistol grip tightly. On top of that put an elastic band. I used a leftover black band from a rifle sling. I had the parts on hand and didn't have grip tape.

    If you use a longer piece of cord you can adjust the loops around the grip to swell at a good spot to fit your hand.
     
Thread Status:
Not open for further replies.

Share This Page