Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My Savage project is done!

Discussion in 'Rifle Country' started by swingset, Mar 30, 2003.

Thread Status:
Not open for further replies.
  1. swingset

    swingset Member

    Joined:
    Dec 25, 2002
    Messages:
    1,477
    Location:
    Ohio
    Here's my completed 12FV in .223
    [​IMG]

    I took the factory cheapo stock, sanded it, shot with self-etching primer, two coats of base primer, then gunship-gray and black to make the night-camo. I sanded the bedding block a hair, it wasn't relieved far enough, took the trigger down to parts and polished all the bearing surfaces. With the accutrigger at it's lowest adjustment, it weighs in just over 1.7 pounds, breaks clean as glass with little creep. The bases are Weavers, the scope is my old Tasco world-class 8x56 with the 3-bar Ajack reticle (my favorite for hunting).

    It's shooting .875" groups with Win 55gr. jhp's, might do better once I get a good handload worked up. It's now a sub-$500 raccoon and varmint killing machine! :D
     
  2. Braz

    Braz Member

    Joined:
    Jan 2, 2003
    Messages:
    434
    Location:
    Mukilteo, Wa.
    Looks good Swingset!

    I am thinking about painting my 10FP's stock. I've been playing with some camo patterns and an crinkled asphalt finish. These things can shoot, can't they? Have fun.
     
  3. cool45auto

    cool45auto Member

    Joined:
    Mar 11, 2003
    Messages:
    2,261
    Location:
    Cleveland, Georgia
    Looks real good!:D
     
  4. Sisco

    Sisco Member

    Joined:
    Dec 24, 2002
    Messages:
    2,775
    Location:
    KS
    Looks good!
    I prepaired my stock much the same as you did, different paint scheme though. Check the "25.06" thread for a pic.
     
  5. tango3065

    tango3065 Member

    Joined:
    Jan 19, 2003
    Messages:
    851
    Location:
    Kentucky
    Can u please give me step by step instructions on how u painted it and what kind of paint was used,it looks great>
     
  6. BusMaster007

    BusMaster007 Member

    Joined:
    Dec 31, 2002
    Messages:
    901
    Location:
    Upper Left Coast
    That's excellent. Real nice job.
    To see it better, I copped it and lightened up. If it's OK, I'll leave that in the link, with your permission. Lemme know if you want it removed... :)
     

    Attached Files:

  7. QuarterBoreGunner

    QuarterBoreGunner Member

    Joined:
    Mar 10, 2003
    Messages:
    1,932
    Location:
    West Oakland
    Nice work- I plane on re-finishing a synthetic M1A stock in the near future, and I like your camo job; I may have to copy it.

    But what the heck is ‘self-etching primer’?

    And did you just tape mask the camo pattern or use some sort of stencil?
     
  8. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    Excellent! Good picture too.

    I have a Savage 308 I've been thinking about doing this to. Except I might go arctic camo and I'd probably do the barrel to as it's stainless.

    Don't have another one of those scopes, do you? I'd like to give one a try if I could find one. Or I could use my Kalinka.

    Anyway, fine job. Thanks for sharing.
     
  9. Quack

    Quack Member

    Joined:
    Jan 31, 2003
    Messages:
    1,400
    Location:
    Cleveland, OH
    OK, one thing that i noticed in the pic is that you have the Harris bipod mounted in reverse...
     
  10. swingset

    swingset Member

    Joined:
    Dec 25, 2002
    Messages:
    1,477
    Location:
    Ohio
    Thanks for the kind words. I didn't know if anyone would care for the camo - but it does look good at night! ;)

    Quack - I know about the bipod being reversed. I prefer them backwards. I can flip the legs down when easier from shooting position when they're back towards me. I always put them on like that. Bugs the crap out of my brother who shoots with me alot. Must be the second reason I did it! :D

    As for the hows and why's of painting:

    Self etching primer is a nasty, stinky primer that really eats into a prepped surface. Auto body guys use it. Really bonds to the surface, and accepts paint better than regular primer. I used Sherwin Williams 988 primer for my stock. I warn you tho, it's nasty stuff. Don't EVER use it without a respirator, even outdoors.

    I sanded the stock with emery cloth and then a 800 grit paper. Cleaned it with alcohol prior to shooting the primer, to get grease and stuff off it.

    The top paint is just standard Testor's Model Master military flats. Nothing special. It works good, sprays easy and holds up well. I shot it with a Pasche VL airbrush, 2 light coats deep. I used hi-tack friskit paper (adhesive masking stuff from an art supply store) to cut the camo pattern, but masking tape would work just fine too.

    I finished it off with 3 coats of Sherwin Williams poly-satin finish, and then hit it with Meguiar's yellow wax and buffed out the shine. Hopefully it will give it some protection from solvents and such. It's a pretty smooth overall job, seems really tough.

    I'm not exactly an artist - so if you're thinking of doing it, don't hesitate. It's easy, really.
     
  11. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    swingset,
    Very nicely done! ' love the camo pattern, ' mind if I copy it?! :)
     
  12. swingset

    swingset Member

    Joined:
    Dec 25, 2002
    Messages:
    1,477
    Location:
    Ohio
    Longbow - don't mind at all.

    It's a loose copy of a "Razzle" pattern of German WWI uboats. Theirs was 3-tone, but the same splinters. I've seen it done as a night camo a few times, and it works really good in low light.

    If you're in the dark, against a woodline or anything vertical like tall grass or shrubs, that camo really disappears. Me, I just like the way it looks! :D
     
  13. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    Thanks! I know it'll be perfect w/ my ninja outfit!:D :D
    Now, all kidding aside, is that the original wood stock, just reshaped? or you got the plastic one in there?
     
  14. swingset

    swingset Member

    Joined:
    Dec 25, 2002
    Messages:
    1,477
    Location:
    Ohio
    That's the original synthetic stock on there. It shot so good with it, I didn't dare replace it with wood. That's a lesson I've learned the hard way. When they shoot, don't mess 'em up! :D

    Plus, it's really meant to be drug around and used, so synthetic makes sense. I really tore up my last varmint gun with a wood stock and always vowed I'd not tear another one up.
     
  15. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    Thanks for the heads up on wood stocks! That possibility never came to me. I like the looks of their wood stocked rifles and thats what I'm wanting to get. But now that you told me your experience, I think I'll just get the synth one and maybe try to reshape it , but I don't know what material to use. I've heard marine putty's (hardens like plastic?) works great for that kinda work, but I have no experience w/ those. Oh well,.. I'll probably just take the plunge and get an after market stock.
    I'm thumbing on my Brownell's catalog right now.....:)
     
  16. swingset

    swingset Member

    Joined:
    Dec 25, 2002
    Messages:
    1,477
    Location:
    Ohio
    www.rifle-stocks.com will do customs for you.

    Wood stocks are fine if done correctly, but I wouldn't replace synthetic that's not binding the barrel with a wood that potentially might. Not worth it unless I'm after the aesthetics and in this case that's a back seat to functionality.

    Wood takes some work to get right, is all.
     
  17. Sisco

    Sisco Member

    Joined:
    Dec 24, 2002
    Messages:
    2,775
    Location:
    KS
    I had the self-etching primer applied at a body shop. Cost me a twelve pack. :D
     
Thread Status:
Not open for further replies.

Share This Page