Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My tactical 10/22 (sort of)

Discussion in 'Rifle Country' started by OneShot, Nov 6, 2003.

Thread Status:
Not open for further replies.
  1. OneShot

    OneShot Member

    Joined:
    May 6, 2003
    Messages:
    137
    Location:
    Nor Cal
    Well it's confirmed, I've got too much time on my hands...

    I was totally bored with my 10/22 and totally broke from mounting a scope on my M1A so I built this out of stuff that I had lying around.

    I took an old Ramline folding stock and pinned it permanantly open with a steel pin. I then mounted up a 1-4 power scope that I had lying around and put an old sling and some mounts on it and Voila! There Ya go. I also connected two mags togather to make them into a quick flip setup.

    The stock was no good as a folder due to federal law unless I fixed it to the open position permanantly, so what the heck. In California rimfires are exempt from the assault weapons BS as long as you don't violate federal law, thus the pistol grip is ok.

    The great thing is that I can put the original stock back on it in about 5 minutes if I wanted. I'm not taking the whole project too seriously but i think it looks kinda cool and didn't really cost me anything.

    Tell me what you think, am I an aspiring mall Ninja?:neener: :neener: :neener: --Oneshot
     

    Attached Files:

  2. Daedalus

    Daedalus Member

    Joined:
    Jul 23, 2003
    Messages:
    520
    Location:
    Gainesville, Florida
    Is that a high capacity magazine?
     
  3. OneShot

    OneShot Member

    Joined:
    May 6, 2003
    Messages:
    137
    Location:
    Nor Cal
    Nope, 2 10 rounders connected back to back. Shoot 10, remove mag, flip over and shoot another 10. The real reasoning behind it is that i have heck of a time getting the single mags out of the gun. There's no easy way to grab them, gotta dig them out with your fingers.

    However, that is a high cap toaster behind the Ruger.

    An evil high cap mag would be illegal in California:evil: :evil: :evil:
     
  4. El Rojo

    El Rojo Member

    Joined:
    Dec 27, 2002
    Messages:
    2,541
    Location:
    The People's Republik of **********
    What do you mean evil high cap mag in the PRK would be illegal? Remember all of those 30 round 10/22 mags you bought back in 1985? I know you have them around the house somewhere. It might take you a while to find them, but look hard enough and you will dig them up. I find my memory comes back best after trips out of state. I get back and then remember where I put them.
     
  5. Dan Shapiro

    Dan Shapiro Member

    Joined:
    Dec 26, 2002
    Messages:
    133
    Location:
    Long Beach, PRK
    :D
     
  6. MaterDei

    MaterDei Member

    Joined:
    Sep 23, 2003
    Messages:
    3,521
    Location:
    Houston
    I have SOOOO many questions

    Where did you get it?

    Is it available in any other colors?

    How much was it?

    Is it all metal?

    and, of course, how many slices will it toast at one time?

    That is one cool toaster! :neener:

    Oh, and a rockin gun too. :cool:
     
  7. QuickDraw

    QuickDraw Member

    Joined:
    Dec 25, 2002
    Messages:
    684
    Location:
    The Great State of California (Bay Area)
    Hey,
    That gun is blocking the view of that really cool toaster!!:neener:

    QuickDraw
     
  8. OneShot

    OneShot Member

    Joined:
    May 6, 2003
    Messages:
    137
    Location:
    Nor Cal
    Gotta tell Ya, That high cap, slide thru toaster is some of the best money I've ever spent!!, Seriously, perfect toast, every time:D --Oneshot

    Hmmmm,. maybe I do have a couple of high caps buried someplace....
     
  9. admar2

    admar2 Member

    Joined:
    Nov 2, 2003
    Messages:
    394
    Location:
    Nashville
    nice one.


    my tactical 10/22.

    [​IMG]
     
  10. Schuey2002

    Schuey2002 Member

    Joined:
    Dec 24, 2002
    Messages:
    3,388
    Location:
    The Oregon Coast..
    ^^^^^^^^

    Now that's my kinda' Ruger 10/22 .. [​IMG]
     
  11. OneShot

    OneShot Member

    Joined:
    May 6, 2003
    Messages:
    137
    Location:
    Nor Cal
    Very nice, But do you have a cool toaster?

    .What kind of barrel is that? What else have you done to it?--Oneshot:D ::D
     
  12. bukijin

    bukijin Member

    Joined:
    Jul 27, 2003
    Messages:
    205
    Location:
    Great Southern Land
    admar2 - How well does it shoot off the bench ?
    (couldn't resist).
     
  13. BusMaster007

    BusMaster007 Member

    Joined:
    Dec 31, 2002
    Messages:
    901
    Location:
    Upper Left Coast
    The Rubber Rifle.
    Hogue stock.
    BEC Rubber Armored 3-9 scope.
    The CLAW sling.
    Vortex flash suppressor.
    Choate heat shield (filed a bit for clearance).
    Harris bipod.
    :D
     

    Attached Files:

  14. NEtracker

    NEtracker Member

    Joined:
    Apr 3, 2003
    Messages:
    412
    Location:
    PRM
    All these 10/22 posts makes me want to pull mine out of the safe.
    It's just a plain old K10/22T with Weaver v24. I dropped it into a nice Fajen stock. The 10/22 has kind of taken the back seat to the Garand this past Summer/Fall.
     
  15. admar2

    admar2 Member

    Joined:
    Nov 2, 2003
    Messages:
    394
    Location:
    Nashville
    mine has a 18" Adams & Bennett fluted barrel.

    Hogue overmolded stock
    BSA contender 3x12x50 scope
    volquartsen target hammer and sear
    volquartsen extended mag release
    volquartsen exact edge extractor
    power custom titanium firing pin


    as far as how it shoots off the bench, that all depends on how much caffeine I've had that day. ;)
     
  16. Sharpshooter223

    Sharpshooter223 Member

    Joined:
    Nov 6, 2003
    Messages:
    102
    *tear* that reminds me of my 10/22 I sold a couple weeks ago :banghead: looked exactly like that without the bipod and it had a 3x9 leupold on it though :D The houge stock and barrell kits are cheap (about $110) but man they help. Also if your looking to soup up a 10/22 with a tight budget I would recommend having the houge stock and barrell a factory bedding kit made specially for the 10/22 and one of the trigger kits off ebay you find for about $15. all of those on mine helped a lot. The trigger kit made the trigger a little lighter and really crisp. But the thing i really liked about it is it made the bolt operate better so i had less jams and it even came with an extended mag release! all that would average about $170 to make an awesome 10/22 ;)
     
  17. zahc

    zahc Member

    Joined:
    Mar 23, 2003
    Messages:
    1,961
    Location:
    TX
    Daedalus--

    nice sig.
     
  18. yayarx7

    yayarx7 Member

    Joined:
    Dec 29, 2002
    Messages:
    350
    Location:
    Fort Worth, TEXAS
    I like your tactical sponge....

    And I love the rifle.


    Toasters OK.
     
Thread Status:
Not open for further replies.

Share This Page