Quantcast

Neck Bushing Die

Discussion in 'Handloading and Reloading' started by jamesb, Sep 12, 2014.

Thread Status:
Not open for further replies.
  1. jamesb

    jamesb Member

    Joined:
    Jun 1, 2007
    Messages:
    201
    Location:
    Indianapolis, IN
    Jumping into the world of 17AH. If I use an extended shell holder, will I be able to use a 17 Fireball neck bushing die with the correct size bushing to size the necks of the 17AH? Will there be problems due to the difference in should angle and body diameter? I have the 22 to 20/20 to 17 sizer die, 17AH FL sizer die and 17AH bullet seat die. I need to order a shell holder but wondered if I could get away with using my extra 17 Fireball NB die with an extended shell holder to neck size once the brass is formed.
     
  2. 243winxb

    243winxb Member

    Joined:
    Jul 7, 2004
    Messages:
    11,555
    Location:
    USA
    My guess is yes. But the neck may have a hard time finding the hole in the bushing.
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice