Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Neck expander Carbide???

Discussion in 'Handloading and Reloading' started by hotwheelz, Mar 8, 2008.

Thread Status:
Not open for further replies.
  1. hotwheelz

    hotwheelz Member

    Joined:
    Sep 17, 2007
    Messages:
    170
    Location:
    Pacific Northwest , Puget Sound
    I havent loaded rifle much and was wondering if anyone makes a carbide neck expander? I thought this would save me from having to lube the case neck b/c I have read some posts talking about powder sticking to the lube in the neck unles you tumble after expaning. Maybe Im barking up the wrong tree but I plan on loading some 30-06 soon and still need to buy some dies.
     
  2. amlevin

    amlevin Member

    Joined:
    Jan 15, 2007
    Messages:
    826
    Location:
    NW Washington
    redding makes a Carbide Expander kit that can be added to their sizing dies. It is a great addition when you load a lot of .223 like I do. Just spray some Dillon Case Lube on the brass, load it in the case feeder and no necessity to lube the case mouth. It is available for several calibers. Carbide Size Buttons
     
Thread Status:
Not open for further replies.

Share This Page