Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need a duty holster for an L-Frame

Discussion in 'Handguns: Revolvers' started by Nightcrawler, Aug 30, 2007.

Thread Status:
Not open for further replies.
  1. Nightcrawler

    Nightcrawler Member

    Joined:
    Dec 24, 2002
    Messages:
    6,950
    Location:
    Utah, inside the Terraformed Zone
    Hey folks, need some advice on this. Friend of mine asked me about good duty holsters for a security company he's a supervisor of. The guns are S&W Model 620 seven-shot .357s, but anything made for a 686 might work. It needs to have a thumb break or other positive retention device (no opened topped CCW gear) and work on a 2.25" duty belt. Black color; open to leather, cordura, or kydex. It should allow for one-handed reholstering as well.

    Any suggestions? What's good, what should be avoided? 'Cause right now they're stuck with Galls catalog Pleather holsters, but they've gotten approval to upgrade.

    Thanks everybody!
     
  2. Black Knight

    Black Knight Member

    Joined:
    Jun 19, 2006
    Messages:
    1,439
    Location:
    Charlottesville, VA
    Do they use leather or nylon? Some companies to check are Safariland, Desantis, Don Hume, Stallion Leather, Uncle Mikes, Tex Shoemaker and Sons, Gould and Goodrich, and A.E. Nelson Leather. One of these should have what he is looking for. Tex Shoemaker and Don Hume were cops when they started their holster companies so they go way back. I would suggest Bianchi but they don't have much for law enforcement revolvers any more. I contacted Bianchi about a decent period holster for a 4" Colt Python made in 1978 and came up empty. I couldn't even get their version of a Border Patrol holster. Good luck most makers have chosen to ignore the revolvers and concentrate on the semi-autos. In all fairness though most agencies swithed to semi-autos long ago.
     
  3. W.E.G.

    W.E.G. Member

    Joined:
    Sep 26, 2006
    Messages:
    7,362
    Location:
    all over Virginia
  4. W.E.G.

    W.E.G. Member

    Joined:
    Sep 26, 2006
    Messages:
    7,362
    Location:
    all over Virginia
  5. jato

    jato Member

    Joined:
    Dec 26, 2002
    Messages:
    80
    Location:
    SoCal
  6. Jenrick

    Jenrick Member

    Joined:
    Mar 17, 2005
    Messages:
    1,679
    Location:
    Austin, TX
    Safariland makes a 070 for 686's, very good holster. It's what I used before I added a tac light to my duty weapon, very secure, smooth, and fast.

    -Jenrick
     
  7. Jeff F

    Jeff F Member

    Joined:
    Mar 9, 2006
    Messages:
    1,507
    Location:
    Silver Springs NV
    I like the Bianchi gun leather myself, but some do not.
     
  8. Elm Creek Smith

    Elm Creek Smith Member

    Joined:
    Aug 22, 2007
    Messages:
    971
    Location:
    Outrider
    Nope.

    "To replace the venerable K-Frame Magnums, S&W wisely chose to use the seven-round L-Frame platform but with cosmetic changes that were guaranteed to appeal to fans of the discontinued models. Thus it is that with its four-inch, heavy barrel and fixed sights the Model 619 apes the appearance of the Model 65 while the Model 620's adjustable sights and underlug barrel are reminiscent of the Model 66. Readers should know that the Models 619 and 620 will fit most holsters designed for K- and L-Frame revolvers."

    ECS
     
  9. Elm Creek Smith

    Elm Creek Smith Member

    Joined:
    Aug 22, 2007
    Messages:
    971
    Location:
    Outrider
  10. Seven For Sure

    Seven For Sure Member

    Joined:
    Nov 3, 2006
    Messages:
    437
    If he get's a molded holster, make sure it's for a 7 shot cylinder or it won't fit right or at all.
     
Thread Status:
Not open for further replies.

Share This Page