Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need advice on scope rings

Discussion in 'Shooting Gear and Storage' started by Morlock, Jan 14, 2003.

Thread Status:
Not open for further replies.
  1. Morlock

    Morlock Member

    Joined:
    Jan 14, 2003
    Messages:
    58
    Decided to change the scope on my savage 10fp (bought used, came with buhnell 4-14 variable) . Just ordered a BSA mil dot. just wondering what height rings should i order? it still wears a factory stock, so i don't have the option of adjustments......

    thanks for any advice .......
     
  2. Quintin Likely

    Quintin Likely Member

    Joined:
    Dec 29, 2002
    Messages:
    898
    Location:
    Relay 3, Target 17
    What size objective is on your BSA? Medium rings will clear up to 44mm, I think, high works for 50-52mm, any bigger needs extra high rings.
     
  3. Swamp Yankee

    Swamp Yankee Member

    Joined:
    Dec 25, 2002
    Messages:
    203
    Location:
    Northeast Connecticut
    Try going to Midway's website. www.midwayusa.com
    Check their Technical Data section. It has tables listing by manufacturer, ring model, and height from which you can determine the ring required for your scope. You will need to know the outside diameter of the scope's objective lens bell. If you don't have it, you should be able to track it down on while your their website.
    Take Care
     
Thread Status:
Not open for further replies.

Share This Page