Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Needing parts for 7mm

Discussion in 'Gunsmithing and Repairs' started by rafael5972, Dec 20, 2012.

Thread Status:
Not open for further replies.
  1. rafael5972

    rafael5972 Member

    Joined:
    Dec 20, 2012
    Messages:
    4
    Hello would anyone know where i could find a cocking piece (unthreaded) for a 7mm Rem.Mag model 4712 churchill highlander by kassnar. I would rather buy the entire bolt action instead, but if not the cocking piece will do for now to make this rifle work. God Bless !!
     
  2. VAPOPO

    VAPOPO Member

    Joined:
    May 23, 2012
    Messages:
    174
    Location:
    Southern Iowa, BFE
    I had one of those in .270 Winchester that with factory ammo was so so but with neck sized reloads was spectacular. Gun Parts Corp has always been my go to place for gun parts.
    \
     
  3. rafael5972

    rafael5972 Member

    Joined:
    Dec 20, 2012
    Messages:
    4
    Thank you for info ill check if out.
     
  4. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    The Churchill Highlander rifle was manufactured in Italy for Kassnar Imports by FIAS (Fabrique Italiani Armi Sabatti) probably around 1986.

    Charles Daly was the last company still in business here that had any connection to them (Michael Kassnar).
    And they closed the doors in 2010.

    I doubt if you can find any parts for one now.

    rc
     
  5. rafael5972

    rafael5972 Member

    Joined:
    Dec 20, 2012
    Messages:
    4
    Rcmodel thanks for the info I pm daly also but have no heard from him yet.
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Wrong Charles Daly now anyway.
    They won't be able to help you.

    Unless I'm mistaken, Mr. Kassnar has nothing to do with the new company.
    Only the Charles Daly name remained the same.

    rc
     
  7. rafael5972

    rafael5972 Member

    Joined:
    Dec 20, 2012
    Messages:
    4
    Ok well checking around for the parts if you know of anyone please let me know.
     
  8. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,873
    Location:
    Alabama and Florida
    If you can borrow one to copy, perhaps a machinist could make one for you. Someone versed in guns and machining could also possibly reverse engineer one from measuring what you have, viewing several photos, and spending a little time drawing up a plan for one to cut on a mill and/or lathe.
     
  9. jimmyraythomason

    jimmyraythomason Member

    Joined:
    Dec 19, 2006
    Messages:
    7,384
    Location:
    Alabama
    Numrich(e-gunparts)lists the unthreaded cocking piece as: Cocking Piece (Unthreaded)

    KASSNAR | CHURCHILL HIGHLANDER

    SKU: 1225240C
    "out of stock" maybe you can get on a waiting list?
     
Thread Status:
Not open for further replies.

Share This Page