good suggestions. I usually recommend the shell sorting plates to keep cases from "nesting". they sort cases into 4 groups based on size so if you do that before cleaning then you will only rarely get nested cases. then after the cases are clean the make separating the media very quick and easy.
As posted, put the .45 ACP brass in the tumbler first and let it run long enough to fill the cases with media, then add the .40's. They won't get stuck in the .45's then.I've been bedeviled by .40 cases getting stuck in my .45ACP, due to incautious sweeping by the range guys, and they don't separate in the tumbler.
Hadn't thought of doing that before. Good idea. I'll try that Saturday when I get back from the range . I always tumbled different caliber cases separately. This will save a lot of time and effort .As posted, put the .45 ACP brass in the tumbler first and let it run long enough to fill the cases with media, then add the .40's. They won't get stuck in the .45's then.
Dump cases in by size: .45, .40, .38/.357/9MM, .32, .25.
Reloader Fred taught me that trick.
What I mean is that they get nested as they're swept up, and stay that way. I don't shoot .40, but I always seem to wind up next to somebody who does. It all comes from a curse placed on me by a psychotic Romani when I was an infant. Yes, I could check them carefully before cleaning, but there are only so many minutes in a day.As posted, put the .45 ACP brass in the tumbler first and let it run long enough to fill the cases with media, then add the .40's. They won't get stuck in the .45's then.
Dump cases in by size: .45, .40, .38/.357/9MM, .32, .25.
Reloader Fred taught me that trick.
I keep looking for a "perfect storm" of nested cases, with a conga line of .500, 45, .40, .38/.357/9MM/.380, .32, .25., and .22 to emerge from my tumbler. If this were to ever happen I would take it as a sign and I would literally run to the nearest 7-11 and buy some lotto tickets.