Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

new barrel for buckmark pistols

Discussion in 'Gunsmithing and Repairs' started by ygbsm66, Dec 9, 2004.

Thread Status:
Not open for further replies.
  1. ygbsm66

    ygbsm66 Member

    Joined:
    Dec 9, 2004
    Messages:
    2
    i have a buckmark camper that the barrel was damaged on. is it possible to re-barrel it with the bullseye target barrel instead?

    thanks,

    joe
     
  2. Standing Wolf

    Standing Wolf Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    24,041
    Location:
    Idahohoho, the jolliest state
    I don't know, but it might be worth your while to call the good folks at http://www.volquartsen.com

    My Volquartsen High Standard barrel is a joy and a delight.
     
  3. jim-alex

    jim-alex Member

    Joined:
    Dec 31, 2002
    Messages:
    13
    Location:
    Northern Va
    Another option is to contact Brownells. They have several 5.5" barrels listed
    for $107 to $116 and the "unlimited" for $148. Don't know the length of the unlimited. Just a thought.

    Jim
     
  4. rbernie
    • Contributing Member

    rbernie Member

    Joined:
    Jan 21, 2004
    Messages:
    20,450
    Location:
    Norra Texas
    The Buckmark barrel is a drop-in, and replacement requires only the two allen wrenches needed to field strip the pistol. Direct from Browning, you can get their shorter barrels (i.e. change to a 4" micro barrel) or buy the Camper or Challenge barrels. All will interchange on the Buckmark frame without an issue.

    The fische parts listing for the Buckmark is at http://www.browning.com/services/gunpartsprices/pdf/buckmark_pistol.pdf . Once you pick out the part number(s) of the stuff you want, contact them at 636-287-6800 and place your order.

    Once note - the fische is not clear on this, but all barrels come with the barrel and barrel block. You do not need to order the barrel block separately.
     
  5. ygbsm66

    ygbsm66 Member

    Joined:
    Dec 9, 2004
    Messages:
    2
    Thanks for the help i'll get one ordered.

    joe
     
Thread Status:
Not open for further replies.

Share This Page