Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New caliber for my m98

Discussion in 'Rifle Country' started by goosegunner, Dec 3, 2006.

Thread Status:
Not open for further replies.
  1. goosegunner

    goosegunner Member

    Joined:
    Dec 29, 2002
    Messages:
    152
    Location:
    Norway
    I have a m98 that already have seen two major changes. 1. Norwegian army, rebarreled to .30-06 in 1950's. and 2. (semi) professional reabuild to hunting rifle, new stock (with nice wood by the way) new 1/4 safety, reshaped bolt arm and scope mount and 4x30 scope (meopta) 8-10 years ago. So any historical value was already lost before I got my hands on the rifle.

    I really like the rifle, the stock fits me is weather stable and looks good, the trigger is reasonably good, the action is smooth and it was my first rifle so I can't/won't sell it. Problem is the barrel have seen better days, when i got the rifle it prodused 3-shot groups 3-5 cm @ 100m, but gradually that have redused to 8-10 cm average and 6-8 cm om a good day. More competent people than me have looked at it, and the conclusion is it needs a new barrel.

    So then the question: Should I change the caliber as well?

    Criteria would be:
    *Cartridge base same as .30-06. (will not do any matal work on the action, if possible)
    *Cartridge works well in m98 magasine, with standard/normal bullets.
    *minimum 6.5 mm (due to hunting reglations)
    *Some comersially avilable ammo (don't reaload much)
    *NOT a barrel burner.
    *Suitable for both small game (rabbit, large birds, fox etc.) and larger game (deer, moose reindeer) i.e handels heavy hunting bullets and fairly light fmj.

    So what is avilable out there?
     

    Attached Files:

  2. Ol` Joe

    Ol` Joe Member

    Joined:
    Feb 25, 2004
    Messages:
    2,087
    Location:
    michigan
    If you don`t want to stay with the 30-06 the 6.5x55 will work just fine. I have a Mark X which is a M98 copy that was originally a `06 that I barreled to the 6.5x55 and feeds and extract without a hitch. I thought the smith might have to open the bolt face a hair but it didn`t need it once we got looking at it.
    I think you`ll find ammo available eveywhere in your area:)
     
  3. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    21,966
    Stay with .30-06. You KNOW it works.
     
  4. Kurac

    Kurac Member

    Joined:
    Nov 22, 2005
    Messages:
    154
    Location:
    Bay Area, Peninsula
    .25-06, .270, .284 ...
     
  5. M110

    M110 Member

    Joined:
    Apr 2, 2005
    Messages:
    194
    Location:
    Illinois, USA
    Stay with the .30-06, or go down to .270 if your really set on changing it.
     
  6. 270Win

    270Win Member

    Joined:
    Apr 25, 2006
    Messages:
    636
    Location:
    Damascus, MD
    .270!
     
  7. jlmurphy

    jlmurphy Member

    Joined:
    Apr 1, 2006
    Messages:
    209
    I have a VZ24 that I rebarreled to 6.5x55, no other modifications necessary, a perfect caliber in my opinion, and really appropriate for a Mauser.
     
  8. Erinyes

    Erinyes Member

    Joined:
    Jan 20, 2005
    Messages:
    243
    Location:
    Northwest GA
    Sounds to me like you ought to just stick to .30-06 when you rebarrel it. Either that or take it back up to 8x57JS.
     
  9. Snarlingiron

    Snarlingiron Member

    Joined:
    Jun 3, 2006
    Messages:
    1,362
    Location:
    Fort Worth, Texas (Where men are men, and a lot of
    If you don't reload, and want the maximum versitility in commercially available ammunition, there is no choice better than the venerable 30-06. Commercial loads are available from 100 to 220 grains in all sorts of bullet configurations. You wont find that kind of range or selection in any other caliber. The 100 grain should be good for varmint type animals, and while I certainly have never done it (nor would I want to), I have read that a solid 220 grain bullet from a 30-06 will take down an elephant if you know where to put it. I know from personal experience that it is very potent medicine for white tail deer. I have shot many of them with a 30-06, and have never lost one yet.
     
  10. MatthewVanitas

    MatthewVanitas Member

    Joined:
    Dec 28, 2002
    Messages:
    3,443
    Location:
    Washington DC (!)
    Do note, gent is in Norway.

    Is 30-06 widely available in numerous different loadings in Norway, or is there a better candidate in terms of diverse loadings?

    Are you avoiding 6.5mm as being not exotic enough?

    -MV
     
  11. goosegunner

    goosegunner Member

    Joined:
    Dec 29, 2002
    Messages:
    152
    Location:
    Norway
    .30-06 is videly avileable here (mostly due to some 100.000 rebarreled m98's beeing sold by the army a few years back), and is among top 3 common rounds.
    It's not that I want a new caliber, I only want to consider the options before i use ~400€ on a barrel. Other options would be .308, but that seems to be a waste in a long action, and possible feeding problems. The 6.5x55 IS the national cartridge (it is partly a norwegian development), but for some reason I just don't like it.

    As for avilability of ammo, it just has to be avilable, no problem if I have to wait 6 weeks for it to be ordered from your side of the Atlantic to get good hunting loads. Fairly prised training ammo is avilable in almost any "normal" caliber, if I am willing to order a larger number.

    A good chance that I will stay with the '06, after all the cartridge is 100 years this year.
     
  12. cracked butt

    cracked butt Member

    Joined:
    Jan 3, 2003
    Messages:
    6,986
    Location:
    SE Wisconsin
    Before rebarreling, try giving the barrel a very thorough scrubbing using copper solvent. Also check to make sure the action screws are good and tight. Unless you have been shooting thousands of rounds it seems unlikely that the accuracy degraded from wearing the barrel out.

    30-06 would be a good choice if you are rebarreling. If its available in your country or if its possible to reload and you have interest in doing so, .280 remington would be an excellent choise as well.
     
  13. goosegunner

    goosegunner Member

    Joined:
    Dec 29, 2002
    Messages:
    152
    Location:
    Norway
    all possible cleaning have been tried, and it worked "some" but not as much as i hoped for. Even got a gunsmith to secure the recoil-lug in epoxy/fiberglass, it to worked, but still not enough. As for shot out barrel, I have shot ~900 rounds with it and nobody knows how much it was used the 50+ years before this. (could be nothing, >3000 rnds, or "cleaned to death") But bottom line: the barrel IS worn out, but anything <10 cm at 100m is plenty good for larger game it's just a little to bad for small game and target shooting.
     
  14. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    If you like 30-06, and its plentiful there as you say it is, then its still a great cartridge and will be for a long time to come IMO.

    Why don't you like the 6.5x55? (I just got one Friday lol...so I have to ask) :D

    For a long action, you could go .270, but that might be too American of a cartridge and pose serious problems obtaining it over there.

    Then is always one of the 7mm rounds. I hear good things about most all of them.
     
  15. goosegunner

    goosegunner Member

    Joined:
    Dec 29, 2002
    Messages:
    152
    Location:
    Norway
    It's nothing wrong with the 6.5x55, it's only a dull cartridge (here anyway). But it has a little recoil, great accuracy and fairly outstanding long-range capabilities. And would probably be the "best" logical choise for my rifle and my use, but as long as I don't like it, I don't like it. Caliber choise should not be only logic an reason, or else we would all end up with rem 700's in .308 ;)
     
Thread Status:
Not open for further replies.

Share This Page