Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Combat Commander

Discussion in 'Handguns: Autoloaders' started by mattk, Apr 14, 2003.

Thread Status:
Not open for further replies.
  1. mattk

    mattk Member

    Joined:
    Feb 3, 2003
    Messages:
    547
    Location:
    Florida
    Hey gang I am looking for info on a New blued steel framed Commader. I have a couple of questions:
    Whats a fair price?
    Any known issues to look a for?
    Anybody have one of the new ones? How do you like it?

    Thanks
     
  2. Sean Smith

    Sean Smith Member

    Joined:
    Dec 28, 2002
    Messages:
    4,922
    1. About $550-600 depending on where you are.
    2. Nope. The new Colts are NICE! :D
     
  3. 10-Ring

    10-Ring Member

    Joined:
    Dec 24, 2002
    Messages:
    12,037
    Location:
    California
    The new Colts I've seen have been nice. I bought a gov't model 2 years ago & it was 100% reliable. It quickly turned into a project gun. I sold it to a buddy when he shot it, liked it & made me a really good offer. I'm thinking about buying another ;)
     
  4. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
    I just bought one with the newer rollmarks, for the purpose of turning it over to a gunsmith for some extensive work (I've owned a lot of 1911's, but this will be my first highly customized one).

    It's a basic Combat Commander blue model, O4691 Colt model number. I paid $590 at a local store, where they had to order it and have the distributor verify they had the new rollmarks. :)

    That said, prior to going to the smith, I've put 400 rounds through it for a bit of a break in. The 400 rounds included (in the order I shot them in):

    30 Winchester white box 230gr - had two failures to feed (both with the same VERY old Shooting Star magazine - no Wilson's at that time)
    50 S&B 230gr ball - no failures
    20 Winchester 185gr Silvertip JHP - no failures
    50 230gr Hydra Shok's - no failures at all
    100 Reloads of Rainier 230gr ball w/3.9gr Clays
    50 Reloads of Golden Sabre 230gr JHP - no problems
    100 Reloads of Rainier 200gr JHP - I had two premature slide lock-backs on these, but they seemed a bit low powered at 4.0 gr Clays, and to be honest I was pretty tired by then and may have just limp-wristed :)

    It's a great shooter and would serve me well as a stock pistol. My only complaints are that the trigger pull needs work (somewhat creepy and very heavy), and the slide is so sharp near the slide-release that it sliced my thumb up pretty badly.

    Here are some pictures of it:


    [​IMG]
    [​IMG]
    [​IMG]
     
  5. mattk

    mattk Member

    Joined:
    Feb 3, 2003
    Messages:
    547
    Location:
    Florida
    Thanks guys. I am going to swing by some places today and see if I can find one.
    Thanks for the model number FJC that will come in handy if I have to order it. Leave nothing to fate when ordering.

    I also plan and customizing my gun. Probalby just:
    Heinie sights(I have some I bought but never had installed)
    Beavertail and bigger thumb safety.
    I can do the trigger work myself.
     
  6. mattk

    mattk Member

    Joined:
    Feb 3, 2003
    Messages:
    547
    Location:
    Florida
    Well no luck. Stopped at 2 stores. Both called a couple of places and said none availible in blued only Parked and Matte Stainless.

    I did see a two toned combat elite little beat up. Let that one go, but I did pick up a Benchmade knife.

    Oh well I will keep looking.
     
  7. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
    Any luck finding one?
     
  8. mattk

    mattk Member

    Joined:
    Feb 3, 2003
    Messages:
    547
    Location:
    Florida
    Nope

    I got no love. Apprentlyl they are back ordered for about 4 to 6 weeks.
    I did find a nice Combat Elite and spend my money on that instead.

    I still plan on getting a Commander but it will have to wait a couple of months.
     
  9. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
    Yipes, sounds like I got mine just at the right time, then. Colt (like most manufacturers) likely produces these in batches. Perhaps post in 1911forum.com in the Colt forum, there's someone from Colt that is a regular there that might be able to let you know when more are coming.
     
  10. CZ-75

    CZ-75 member

    Joined:
    Jan 2, 2003
    Messages:
    1,788
    Location:
    BFE
    Has Colt gone to CNC machining?

    I've seen some of their work from the past 4-5 years and thought it was a joke how bad even stuff like Gold Cups were finished - uneven flats, flats that were taller on one side, rounded corners, etc.

    I doubt CNC would produce such crap.
     
  11. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    I like Colt... I always have. I'm not of the 'If it's not a Colt, it's a copy' clan but Ido feel a special something with a nicely fitted, properly running Colt that I don't with Kimber or even Springfields which have treated me well.

    My blue NRM Colt Government is the nicest fitted Colt I've ever had. It' is significantly better fitted and finished than my late model Gold Cup Trophy. Beautiful gun to use as is and probably the very best starting point for a custom full-size 1911. In my opinion. I did swap out the trigger for a shorter alumimum jobbie and had the sear and hammer polished up a bit.

    [​IMG]
     
  12. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
    My understanding from conversations with people from Colt and posts from a Colt worker on another board is that they've been switching over to CNC over the past 5 years or so.

    The newer Colts I've purchased and looked at *recently* (as in the past 6-8 months or so) have all been very nicely made, with no problems.
     
  13. CZ-75

    CZ-75 member

    Joined:
    Jan 2, 2003
    Messages:
    1,788
    Location:
    BFE
    I might just buy one, then. I have had bad luck with a Colt I bought once that the dealer didn't have in stock.
    Was disappointed when I got it, but took it rather than wait 6 months.



    BTW, are they going to make a NRM GM in SS?

    I had an "enhanced" SS GM some time back, but like the "traditional" look of vertical serrations and the old-style rollmark w/o having to worry about my perspiration eating away the blued finish.

    Also, these are 70 series regarding the action, right?
     
  14. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
  15. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    By this, do you mean a stainless steel new roll mark 5" gun?

    If so, they already make them... and they look like this. This one belongs to DSK. I think he's had about three of them now.

    [​IMG]
     

    Attached Files:

  16. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    Here's a pic of two NRM SS guns, also DSK's.

    [​IMG]
     
  17. CZ-75

    CZ-75 member

    Joined:
    Jan 2, 2003
    Messages:
    1,788
    Location:
    BFE
    No, I meant a new pre-70 series in SS, from the "custom" shop.

    I hear they're making 50, starting in May for the first run..
     
  18. Johnny Guest

    Johnny Guest Moderator Emeritus

    Joined:
    Dec 20, 2002
    Messages:
    3,721
    Location:
    North Texas
    Yikes!

    So many different model numbers, so many different goodies!

    Do all the 1911 variants now come with the long trigger and flat manispring housing?

    I really like the roll marks on FJC's pistol, and those large diamond stocks are beautiful. Are those factory or aftermarket?

    I'm currently carrying a CLW with a later slide fitted--The one with the plain, flat rib on top. I don't particularly care for this slide version, but I got it from a friend at a good price.

    One day, I will probably get EXACTLY what I want, but will probably have to pay big bucks for it:
    LW frame in silver color (bead-blasted bare aluminum would be okay.)
    Short tang grip safety.
    Short trigger.
    Arched MSH.
    Stainless slide, with the fully-radiused "bar of soap" treatment.
    Either dark walnut, large diamond stock panels, or ebony fluer-de-lis pattern.

    Isn't it nice that we can still manuever around and get exactly what each of us wants? :p

    Best,
    Johnny
     
  19. surfinUSA

    surfinUSA Member

    Joined:
    Apr 24, 2003
    Messages:
    630
    Location:
    By the ocean
    Matt these are great guns.

    The Commander Model has the aluminum frame and the Combat Commander has the steel frame. I carried a Commander model (aluminum frame) years ago. It was reliable and accurate and a hell of alot easier to carry for 8 hours than the steel framed Combat Commander.
     
  20. FJC

    FJC Member

    Joined:
    Dec 26, 2002
    Messages:
    391
    Location:
    Michigan, USA
    Those are the factory stocks on the Commander in my pictures above - easily the prettiest factory stocks I've seen. They're actually listed as Rosewood, I believe.

    As I'm having that pistol hard chromed and getting some gaboon ebony grips for it, I'll find a home for them on another pistol I have. :)
     
  21. mattk

    mattk Member

    Joined:
    Feb 3, 2003
    Messages:
    547
    Location:
    Florida
    SurfinUSA,
    I almost always carry a Steel framed gun. The only exception is my Colt Mustang Pocketlite.
    I prefer the way a steel gun shoots and find that a good gun belt and holster make carry a fullsized 1911 fairly easy.
    A BHP is a piece of cake for me to carry all day.

    I am loving My New Combat Elite.
     
Thread Status:
Not open for further replies.

Share This Page