Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New K31 Swiss

Discussion in 'Rifle Country' started by jpwilly, Feb 28, 2009.

Thread Status:
Not open for further replies.
  1. jpwilly

    jpwilly Member

    Joined:
    Aug 10, 2007
    Messages:
    3,892
    Location:
    Phoenix AZ
    Picked up a K31 Swiss at a local fun shop. :D Had the no drill scope mount already installed and a Tasco scope. I've since replaced the scope with a 3-12x32mm Alaskan Guide from Cabela's (on clearance) and applied a few coats of Tru Oil on the stock and rubbed it with some 000 Steel Wool to get the shine down. What do you think so far?

    102_6066.gif

    102_6070.gif

    Also, I ordered 200 rnds of Prvi from AIM and reloading dies from Graf's. Any must haves for the K31? I heard these will shoot pretty good anyone here have any accuracy tips?
     
  2. GTFord1

    GTFord1 Member

    Joined:
    May 27, 2008
    Messages:
    66
    I've got one too. I'd like to get one of those mounts myself sometime.

    I don't shoot it much, but you should buy some Swiss GP11 surplus ammo for it. Non-corrosive, match grade stuff. That's what I use, anyway, and it's quite well regarded.
     
  3. alemonkey

    alemonkey Member

    Joined:
    Nov 22, 2007
    Messages:
    1,678
    Location:
    Lincoln, NE
    Very nice. Is the scope mount centered over the bore or is it offset?
     
  4. jpwilly

    jpwilly Member

    Joined:
    Aug 10, 2007
    Messages:
    3,892
    Location:
    Phoenix AZ
    Offset to the right I can still use the irons but being a lefty I'll have no check weild when looking into the scope.
     
  5. Ohio Gun Guy

    Ohio Gun Guy Member

    Joined:
    Apr 29, 2008
    Messages:
    2,470
    Location:
    Central Ohio
    NICE!

    I need one of those! :D
     
Thread Status:
Not open for further replies.

Share This Page