Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NFA question

Discussion in 'NFA Firearms and Accessories' started by xtarheel, Oct 3, 2012.

Thread Status:
Not open for further replies.
  1. xtarheel

    xtarheel Member

    Joined:
    Dec 30, 2002
    Messages:
    244
    Location:
    North Carolina
    An acquaintance asked me to come over and evaluate / appraise a group of firearms that he just inherited from his late father. Everything was going fine until I opened a case with a Thompson Model 1927 A1, serial number 10XXX F. The barrel is 12" long with a Thompson marked compensator. Working the bolt manually, I could not detect any sear engagement. Is this a NFA weapon? I asked if he had any paperwork indicating a $200 tax had been paid. He did not have anything.

    What does he have?
     
  2. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    This is a semiautomatic "West Hurley" gun made by Numrich or Kahr Arms. The reason you do not detect any sear engagement is because it fires from the closed bolt. It would be OK except for the 12" barrel. That makes it an unregistered SBR. Get rid of it.
     
  3. Flyincedar

    Flyincedar Member

    Joined:
    Dec 4, 2010
    Messages:
    189
    Location:
    Central Ohio
    Don't just get rid of it. Do it properly, and first find out if that has to be done. Have an attorney contact ATF and see if it is in the registry. Just because he has no paperwork, does not mean that it does not exist!

    There could very well be paperwork, and if it was left to him, it could possibly be transferred depending on how things were set up.
     
  4. Flyincedar

    Flyincedar Member

    Joined:
    Dec 4, 2010
    Messages:
    189
    Location:
    Central Ohio
    Just realized you are in Illinois. Can't have sbr there, so definitely contact an attorney. I heard that was changing, but highly doubt it will be retroactive, or apply to that one.
     
  5. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    IMO, Kahr Arms semi Thompsons aren't valuable enough to justify the cost of hiring an attorney. When I suggested "getting rid of it," that was shorthand for the usual procedure -- breaking it down for parts, etc. Actually, removing the barrel and getting rid of that would probably get you in the clear. Thompson barrels are tricky to remove, though, and you can't send the gun anywhere in its present condition. Any way you look at it, this is a hot potato. You don't want to get caught with it.
     
  6. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    On a state level, I believe SBR's like this are legal in Illinois if (1) you have a C&R FFL, or (2) you're a member of a recognized reenactment group, with a membership card.

    You can Form 1 an SBR in Illinois ($200 "making" tax), but this has to be approved before the work is done.
     
  7. Flyincedar

    Flyincedar Member

    Joined:
    Dec 4, 2010
    Messages:
    189
    Location:
    Central Ohio
    You may wanna double check that. I remember seeing threads recently because guys were all excited about new law that would allow them to have an SBR, meaning they could not in the past Form 1 an SBR. If I remember correctly, the first two examples you gave sound right. Maybe someone from Illinois will chime in. We can have it all in Ohio with the proper paperwork, and I'm not totally versed on IL law. Just repeating what I have seen
     
  8. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    You are right. This is new legislation with an effective date of January 1, 2013.

    Since a trust can neither hold a C&R FFL nor be a reenactor, a Form 1 or Form 4 for an SBR will probably require a CLEO signoff.

    The question is this: Can the OP's acquaintance "legalize" the gun by removing the 12" barrel (and getting rid of it), and retrofitting a 16" plus barrel? (I know that you can't do this sort of thing with a machine gun, because of the rule that "once a machine gun, always a machine gun." Is there a rule that "once an SBR, always an SBR"?) Maybe it can be legally made an SBR again under the new legislation.
     
  9. Flyincedar

    Flyincedar Member

    Joined:
    Dec 4, 2010
    Messages:
    189
    Location:
    Central Ohio
    The problem is, he currently possesses it, illegally. Doesn't help him right now. Being not 100% familiar with IL law, im not sure there is even someone he could take it to thst could have it in the meantime.

    Consider this... He would likely have to find and order a barrel. The whole time, he is in illrgal posession while he waits for it. Then, he has to put it on himself, or involve someone else with an illegal gun, to have them do it.

    Seems like a ton of hassle to me. If he can pull the barrel immediately and get rid of it, he might be able to do it.
     
  10. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    I agree. Unless he can miraculously find the registration paperwork, he's in possession of a contraband item. If he has the skills and tools to remove the barrel himself (obviously he can't take it to a gunsmith), and he gets rid of the barrel, he'll be in possession of something (a semiautomatic receiver) which in itself is legal. Then he can either put on a 16+" barrel, or wait until after the first of the year to try and get approval for an SBR.
     
  11. Bubbles

    Bubbles Member

    Joined:
    Apr 26, 2004
    Messages:
    3,152
    Location:
    Eastern Panhandle of West Virginia
    Nope, an SBR can be turned back into a Title I firearm by removing the short barrel and notifying the ATF via a letter that the rifle should be removed from the registry. We had to send such letter once; the response was received 18 months later.
     
  12. 627PCFan

    627PCFan Member

    Joined:
    Oct 18, 2007
    Messages:
    2,009
    Location:
    Sterling, VA
    Remove the comp and screw on a pipe to the end of the barrel......temporarily until you can sort things out
     
  13. Flyincedar

    Flyincedar Member

    Joined:
    Dec 4, 2010
    Messages:
    189
    Location:
    Central Ohio
    That's still illegal unless it is permanently attached.... Just like a short AR barrel with a long brake to bring it back to 16+".... Must be pinned and welded, or just full fusion welded
     
  14. AlexanderA
    • Contributing Member

    AlexanderA Member

    Joined:
    Feb 27, 2011
    Messages:
    3,256
    Location:
    Virginia
    Bubbles wrote:

    Yes, but this SBR was (apparently) never registered in the first place. The question is really whether contraband can be legalized by removing the offending feature (the short barrel).
     
  15. Carl N. Brown

    Carl N. Brown Member

    Joined:
    May 10, 2005
    Messages:
    8,105
    Location:
    Kingsport Tennessee
    don't over react ...

    Was there a shoulder stock, or any provision for mounting one, and is the model designation 1927 A1 or is it possibly the A5?

    Numrich Arms made a semi-auto pistol version of their semi auto Thompson; the brochure I have from the 1970s describes it as the New Thompson Pistol Model 1927 A-5, 26" long with a 13" barrel (13" from muzzle to breech face). Today Kahr Arms makes a Thompson pistol also, but with the original 10.5" barrel length.
     
  16. xtarheel

    xtarheel Member

    Joined:
    Dec 30, 2002
    Messages:
    244
    Location:
    North Carolina
    It does have a fixed butt stock. I found a serial number listing, it was made in 1980.

    If it was manufactured with the 12" barrel (the onwers manual I found on line shows that as an option) I would think it is in the registry. Is that registry available on line or would I need to contact the BATF?
     
  17. Bubbles

    Bubbles Member

    Joined:
    Apr 26, 2004
    Messages:
    3,152
    Location:
    Eastern Panhandle of West Virginia
    It is not online as it's tax information and is considered private.

    Also, you should not contact the ATF, an attorney should send a letter to the NFA Branch at 244 Needy Road, Martinsburg, WV 25405 with a description of the gun, make, model, serial number, and asking if it's in the NFRTR.
     
  18. Sam1911

    Sam1911 Moderator

    Joined:
    Oct 22, 2007
    Messages:
    34,348
    Location:
    Central PA
    I'm going to copy this and re-post it just for emphasis:

    This isn't a casual inquiry. Do it exactly like this.

    Having determined that the weapon was manufactured this way (or at least you have reason to think that it probably was) there is a pretty good chance that the paperwork WAS done. Manufacturers only send out guns to dealers. Manufacturers only send out NFA guns to Class 02 dealers. Class 02 dealers don't sell NFA guns without a Form 4 -- it isn't worth the risk.

    So if it did come from the factory that way, it WAS papered at some point. The Form 4 may be in a safe deposit box, gun safe, or stored with the late father's important papers.

    However, your pal STILL needs the help of an attorney, because he cannot simply inherit that gun. There is a specific process for transferring an NFA weapon via inheritance and if he doesn't do it right, that gun is illegal and worth 10 years in prison and $250,000 in fines.
     
  19. crazy-mp

    crazy-mp Member

    Joined:
    Mar 17, 2008
    Messages:
    820
    Location:
    Missouri
    Did the person who died always live in IL? I have encountered people who have moved to Missouri and didn't update their form 4's with their new address and have had NFA items, it could have been registered in a NFA friendly state and he just didn't want to give it up so it was hid... Not saying that's legal by any stretch, but trying to give you some hope :)
     
  20. xtarheel

    xtarheel Member

    Joined:
    Dec 30, 2002
    Messages:
    244
    Location:
    North Carolina
    This person did also own a residence in Florida.
     
  21. MachIVshooter

    MachIVshooter Member

    Joined:
    Aug 11, 2005
    Messages:
    14,834
    Location:
    Elbert County, CO
    If you're not comfortable removing and destroying the barrel, go to the hardware store, get a piece of steel pipe that will bring it over 16" and weld it to the barrel (NOT to the removeable compensator). It'll be ugly, but it'll be legal. This is what I would do if I came into possession of an SBR and I wasn't sure about it's legality.

    Now you'll have a lawful firearm that you can send somewhere to have a proper 16" barrel attached. In the interim, if you're so inclined, you can inquire as to it being on the registry without worrying about prosecution.
     
  22. lilguy

    lilguy Member

    Joined:
    Apr 27, 2008
    Messages:
    464
    Location:
    NE Illinois, just outside Gulag.
    If the SBR law stands through the Illinois veto session could he just register it then or does he have to show a history of ownership of that item?
     
  23. wally

    wally Member

    Joined:
    Jan 2, 2004
    Messages:
    12,748
    Location:
    Houston, Tx
    Don't panic, if its less than 16" barrel and semi-auto only (closed bolt) Its probably one of the Auto-Ordnance/Numrich pistols.

    Unless its been modified to mount a shoulder stock or has had a vertical foregrip added, its just a handgun.
     
  24. MasterSergeantA

    MasterSergeantA Member

    Joined:
    Nov 21, 2008
    Messages:
    613
    Location:
    Arizona Territory
    Actually, if it is one of the AO pistols and is over 26" long, it can have a vertical foregrip and is no longer considered a "handgun" by ATF definition. Of course, the addition of a stock makes that moot.
     
  25. MachIVshooter

    MachIVshooter Member

    Joined:
    Aug 11, 2005
    Messages:
    14,834
    Location:
    Elbert County, CO
    Barrel still needs to be 16". You can have miles and miles of receiver behind it, but that tube still needs to be 16". Otherwise, regardless of overall length, a VFG or AFG on a handgun makes it an AOW.

    If OAL was all that mattered, most of the SBRs out there wouldn't be, because OAL is measured with stock extended/unfolded. Even a 7.5" AR will exceed 26" with stock extended.

    Unless he can find out from the manufacturer how this weapon was sold, he needs to operate under the assumption that it was a rifle and get that tube to 16", either by replacing it or permanently attaching something.

    As well, unless they've issued a different interpretation very recently, you cannot convert back and forth between handgun configuation and rifle configuration unless the gun was sold as a carbine kit (Like the Beretta Neos or Thompson Encore kits). Unless you have put it on a form 1 and SBR'd it, if you get found with a handgun that was originally sold as a rifle, they can put your butt in a sling. Going the other way is allowed, though.
     
Thread Status:
Not open for further replies.

Share This Page