Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nipple wrench/capper for 1858 Rem?

Discussion in 'Blackpowder' started by GaryNConcord, Feb 10, 2011.

Thread Status:
Not open for further replies.
  1. GaryNConcord

    GaryNConcord Member

    Joined:
    Dec 22, 2010
    Messages:
    15
    I've just got a Uberti 1858 Remington revolver. I've had one chance to shoot it and loved it. I need some advice on type or brand for a couple of accessories. First off, can someone recommend a good nipple wrench? I need one with some back bone. The 'ears' on the Traditions t-handle wrench that I had bought sheared off when I tried to unscrew some of the nipples. (This is a brand new gun, so I don't suspect rust, or poor cleaning gumming it up).
    Secondly, what kind of capper will work for putting caps on the nipples? The inline one I bought can't get into the recess around the nipple to place a cap on it.
    Incidentally I've found #11 CCI caps to work best. I tried #10 and had numerous misfires, although the Uberti website recommended #10. Another justification why real men shouldn't read directions.:D
    After I do some research on how to do it, I'll be posting a pic of my revolver in the 1858 club thread.
     
  2. Prairie Dawg

    Prairie Dawg Member

    Joined:
    Mar 16, 2008
    Messages:
    612
    Location:
    Ohio
    Ted Cash racheting nipple wrench from the possible shop.
    http://www.possibleshop.com/s-s-nipple-wrench.html
    Product #18-1124

    Ted Cash in-line capper # 18--60

    Many folks open up the nipple recesses on Remmies with a dremel tool.
    Makes 'em much easier to cap.

    If you want 100% reliable ignition, use Treso nipples and Remmington #10 caps.
    Put the caps on & seat with a wooden dowel.
    The possible shop carries Treso nips too.
    --Dawg
     
  3. GaryNConcord

    GaryNConcord Member

    Joined:
    Dec 22, 2010
    Messages:
    15
    Prairie Dawg, that's the kind of info I was looking for. Already placed the order.
    Thanks!!!
     
  4. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    Make one...

    [​IMG]
     
  5. Hellgate

    Hellgate Member

    Joined:
    Jan 11, 2004
    Messages:
    1,440
    Location:
    Orygun
    Gary,
    My Ubertis like the Remington #10 caps on their original factory nipples. If I were to have ignition problems or cap jams I'd have swapped them out but so far and about 1000 rounds later they're doing fine.
     
  6. 45-70 Ranger

    45-70 Ranger Member

    Joined:
    Dec 16, 2010
    Messages:
    337
    Junkman 01,

    That is a clever idea. The old T handle wrench I have is about 40 years old and is still a good one, but I do like what you did there. What size socket did you use there? I'm inspired! Think I'll build me one too! Thanks for the pic.

    Wade
     
  7. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    That's a 3/16ths socket and it fits all my .44 cal. revolvers. I'll have to make a smaller one for my Pocket Navy though.
     
  8. rocky branch

    rocky branch Member

    Joined:
    Apr 11, 2009
    Messages:
    359
    Location:
    Midwest
    The good old American "tendency to tinker" at its best!
    Very nice!
     
  9. 45-70 Ranger

    45-70 Ranger Member

    Joined:
    Dec 16, 2010
    Messages:
    337
    Outstanding junkman 01!
    Thanks for the info. My little milling machine will get some use again.

    Wade
     
  10. napp

    napp Member

    Joined:
    Dec 3, 2010
    Messages:
    61
    Location:
    Georgia
    I had the same question a couple of months ago. I ended up going with the idea that junkman suggested. It works like a charm; and was easily made with a Dremal tool. Kudos to junkman for the idea.

    [​IMG]
     
  11. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    :eek: Thanks guys, but I didn't invent that idea. I learned it from a more experienced member here (denster) and just pass the idea along to whomever needs it. You do the same and that's how we maintain the knowledge base. Glad that it help you though. :eek:
     
  12. Prairie Dawg

    Prairie Dawg Member

    Joined:
    Mar 16, 2008
    Messages:
    612
    Location:
    Ohio
    Here's a pic of what some folks do to Remmie cylinders to make them easy to cap, even with a snail capper.
    You can do it in a few minutes with a dremel tool.

    [​IMG]

    Photo is courtesy of Larsen Pettifogger.
    --Dawg
     
  13. GaryNConcord

    GaryNConcord Member

    Joined:
    Dec 22, 2010
    Messages:
    15
    Prairie Dawg thanks for the pic. That would make for a good rainy afternoon project.
     
  14. rocky branch

    rocky branch Member

    Joined:
    Apr 11, 2009
    Messages:
    359
    Location:
    Midwest
    Friend showed me some from his dad who had cut off and notched some extensions of various lengths.
    No idea why-looks like a waste of an extension to me.
    Possibly fits down into cylinder.
     
Thread Status:
Not open for further replies.

Share This Page