Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Number For The Lee Shell Holder For 357 Sig.

Discussion in 'Handloading and Reloading' started by PCCUSNRET, Jul 15, 2011.

Thread Status:
Not open for further replies.
  1. PCCUSNRET

    PCCUSNRET Member

    Joined:
    May 4, 2009
    Messages:
    1,161
    Location:
    Virginia
    Googled it and couldn't find the number. I believe it is #19 (same as 40 S&W) but can't find it listed anywhere. I tried #19 using RCBS dies on a Rock Chucker press and it doesn't the area of the neck is not nearly as long as on a new piece of brass or a commercial round. Am I using the wrong shell holder? Thanks.
     
  2. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,299
    Location:
    Mount Desert Island Maine
    The 357 SIG, 40 S&W, and 10 MM all use the same shell holder according to my Lee Info on my universal shellholder info(#19) AND on the RCBS ones also(#27). Also used for the 224 Weatherby Magnum.
     
Thread Status:
Not open for further replies.

Share This Page