Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Numrich over under swivel breech

Discussion in 'Blackpowder' started by patrickl, Mar 17, 2011.

Thread Status:
Not open for further replies.
  1. patrickl

    patrickl Member

    Joined:
    Oct 5, 2009
    Messages:
    5
    Anyone shoot one of these? What loading do you use?
     
  2. Cowboy2

    Cowboy2 Member

    Joined:
    Dec 16, 2007
    Messages:
    233
    Link? I'd be interested to see it (the rifle).

    EDIT--never mind, found it.
     
    Last edited: Mar 17, 2011
  3. arcticap

    arcticap Member

    Joined:
    Mar 20, 2005
    Messages:
    6,185
    Location:
    Central Connecticut
    I only found the one reference below. For public access to the following thread, follow my personal referral link to register for free at the Muzzle Loading Forum.

    http://www.muzzleloadingforum.com/fusionbb/index.php?referral/4225/

    It's probably a good idea to measure the land to land bore diameter to see if the barrels are true .45's or closer to being .44's. But either way a starting .45 target load would be ~40 - 45 grains of powder. Then increase the powder charge in increments of 5 - 10 grains until the accuracy and power is satisfactory for the distance and the task, whether that's to punch paper or to hunt game with.
     
    Last edited: Mar 17, 2011
Thread Status:
Not open for further replies.

Share This Page