Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Okay, Name This Load

Discussion in 'Handloading and Reloading' started by PCCUSNRET, Feb 3, 2013.

Thread Status:
Not open for further replies.
  1. PCCUSNRET

    PCCUSNRET Member

    Joined:
    May 4, 2009
    Messages:
    1,161
    Location:
    Virginia
    Cleaning up some 22-250 brass and ran across the 3 pieces of FC brass with oversized necks. The inside of necks on these 3 cases measure .254 (too large for a .243 and too small for a .257 caliber). Could this becaused by an oversized chamber in the 22-250 they were shot in or is there another round that could use a 22-250 cartridge with an enlarged neck?

    [​IMG]
     

    Attached Files:

  2. Lost Sheep

    Lost Sheep Member

    Joined:
    Aug 16, 2009
    Messages:
    2,661
    Location:
    Alaska
    From where?

    Were these range pick-ups? If we knew how/where you got them it might help solve the mystery.

    Lost Sheep

    also, diameter at the base (rim and in front of the extractor groove) and the shoulder. How about cartridge length? If somebody fired them out of the wrong chambering the blown-out dimensions would be a clue.
     
Thread Status:
Not open for further replies.

Share This Page