Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

old brass scopes

Discussion in 'Blackpowder' started by quiknot, Jul 22, 2006.

Thread Status:
Not open for further replies.
  1. quiknot

    quiknot Member

    Joined:
    Jan 17, 2006
    Messages:
    150
    Location:
    wisconsin
    as anyone seen anyone who carries the old brass 30"+ scopes...i have one but have not been able to find another source for them....for parts etc.
     
  2. Oldnamvet

    Oldnamvet Member

    Joined:
    Jun 15, 2005
    Messages:
    1,675
    Location:
    Michigan
    EP0008 Brass Tube Telescopic Sight 32 1/2" $260.00



    Click to enlarge
    High quality brass tube scope, ¾” in diameter, 4X – 15mm objective lens, 3” eye relief. Fully coated optics for a sharp view. Brass screw caps on each end protects lenses. Includes unpolished, flat-bottomed brass mounts ( for octagon barrel), allows elevation adjustment at the rear with windage adjustment on front mount. Round barrels require the bottoms of the mounts to be made concave, or flat spots made on the barrel. Each mount requires (2) blind 6X48 standard American holes to be drilled and tapped into the barrel. Screws included.


    This is from Dixie gun works. Picture didn't come through. Sorry.
     
  3. carpettbaggerr

    carpettbaggerr Member

    Joined:
    Nov 13, 2003
    Messages:
    1,676
    :)

    [​IMG]
     

    Attached Files:

  4. oneshooter

    oneshooter Member

    Joined:
    Nov 21, 2004
    Messages:
    1,322
    Location:
    TEXAS, by God
  5. quiknot

    quiknot Member

    Joined:
    Jan 17, 2006
    Messages:
    150
    Location:
    wisconsin
    wow....

    i know i never paid 1/3 of the price they are now....but that was about 20 yrs ago....but they still look the same...
     
Thread Status:
Not open for further replies.

Share This Page