Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

older 870

Discussion in 'Shotguns' started by tango3065, Jan 22, 2003.

Thread Status:
Not open for further replies.
  1. tango3065

    tango3065 Member

    Joined:
    Jan 19, 2003
    Messages:
    851
    Location:
    Kentucky
    Hey guys I bought today a 870 21''incher with full turkey choke for 150.00 it will have to be refinished from wear an light surface rust it looks to have been used alot but still great mechanicly, was this a good price also who would be good to refinish this gun oh also it has a camo stock but kinda needs redone.
     
  2. HSMITH

    HSMITH Member

    Joined:
    Dec 26, 2002
    Messages:
    4,933
    For a mechanically solid 870 that is a good price, I will buy every one I can find for that price.

    Unless you want a shiny finish I would 1) give it the krylon touch, paint it, or 2) have it parkerized. If you paint it you can touch up for life with a $3 can of paint. Rust? Never if the paint is intact. Ugly? More than likely unless you are somewhat artistic. If you park you will have a durable finish that will hold oil well. Dull and dark too, good on a turkey gun. Parking it should only be $100 tops, and likely under $75. Lots of hobbyists park guns, you could even help if you ask, and get it done for a 12 pack.
     
  3. 9mmMike

    9mmMike Member

    Joined:
    Dec 26, 2002
    Messages:
    702
    Location:
    SE PA
    If there was a store selling 150.00 870's around here, I'd be in big trouble!
    I paid 155 for my last one and it was well-used. I refinished the wood and it is still well-used but I am tickled with it.
    Good deal and good luck.
    Mike
     
  4. RussB

    RussB Member

    Joined:
    Dec 27, 2002
    Messages:
    529
    Location:
    Connecticut
    Wilson's Combat willtotally refurbish your shotgun, including Parkerizing for $200. That is called the "Remington Steal" package. They will do just the Parkerizing on a shotgun for $80.

    Wilson
     
  5. labgrade

    labgrade Member In Memoriam

    Joined:
    Dec 22, 2002
    Messages:
    1,289
    Location:
    west of Loveland, CO
    "Surface rust" usually means you've got some inside as well. Too, springs are particularily prone to rust - do a tear down to make sure = cheap insurance, takes ten minutes & will allow some familiarity if you're not already to speed.

    BTW, great deal on an outstanding package = my all-'round fave firearm. I paid easily twice that for new.

    Far as camo goes, the worse the better. ;) No game animal gives points on how it looks - only on how they don't see it.
     
  6. Dave McCracken

    Dave McCracken Moderator In Memoriam

    Joined:
    Dec 20, 2002
    Messages:
    13,938
    Location:
    MD.
    $150? Good price, even if it needs a little TLC.

    I suggest following Labgrades's advice. Check the inside for corrosion and grunge. 870's are easy to take apart and put together.

    An aside, a full set of choke tubes and some mild mods(Trigger job, long forcing cone) will give you a real do anything shotgun. Enjoy...
     
  7. ruger357

    ruger357 Member

    Joined:
    Dec 26, 2002
    Messages:
    1,585
    Location:
    RI
    You did good. Enjoy it.
     
  8. tango3065

    tango3065 Member

    Joined:
    Jan 19, 2003
    Messages:
    851
    Location:
    Kentucky
    Nope no rust just a lot of gunk, im having problems finding someone in my are to parkerize it. Also what is the best way to get the surface rust off?
     
  9. labgrade

    labgrade Member In Memoriam

    Joined:
    Dec 22, 2002
    Messages:
    1,289
    Location:
    west of Loveland, CO
    Surface rust can be attacked pretty good with either 000-0000 steel wool or the roughest (brain fade) plastic scrubby-thing ... oh yeah = Scotch Guard stuff.

    Wipe some BreakFree on it during & after.
     
  10. tango3065

    tango3065 Member

    Joined:
    Jan 19, 2003
    Messages:
    851
    Location:
    Kentucky
    :) Thanks guys I have found a pro who is going to bead blast and blue for 50. bucks and this is hot blue, now i need a nice synthetic stock or someone to recamo my wood one. Also great forum with great answers.
     
  11. Dave McCracken

    Dave McCracken Moderator In Memoriam

    Joined:
    Dec 20, 2002
    Messages:
    13,938
    Location:
    MD.
    Re camoing your wooden stock is no problem. Use some 4/0 steel wool to SLIGHTLY roughen the finish and then use bow spray paint to mix and match your hunting habitat. Two or three colors is plenty.

    I just do flat black myself, and renew as needed. Sounds like you've got a great shooter there...
     
  12. tango3065

    tango3065 Member

    Joined:
    Jan 19, 2003
    Messages:
    851
    Location:
    Kentucky
    I finally sanded all the paint off and have decided to redo the wood since it looks so nice, would anyone have opions on birchwood casey tru oil?
     
  13. Dave McCracken

    Dave McCracken Moderator In Memoriam

    Joined:
    Dec 20, 2002
    Messages:
    13,938
    Location:
    MD.
    Tru Oil's a good finish, follow the directions and you'll do OK.

    Caveat, use good ventilation and in an ambient temperature of 60 or more.

    HTH...
     
Thread Status:
Not open for further replies.

Share This Page