Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

P22 Detail Strip Reassembly

Discussion in 'Gunsmithing and Repairs' started by Sentry, Jan 1, 2003.

Thread Status:
Not open for further replies.
  1. Sentry

    Sentry member

    Joined:
    Jan 1, 2003
    Messages:
    119
    I've gotten this thing down and back except for 4 things I believe. How/which way in the most detailed description (if possible pictures) possible, are the sear spring, slide stop spring, trigger lock spring, and hammer spring supposed to go back in? I guess I don't have it all down...it kind of blew up as I took it apart so I couldn't make a mental note of how it all went back together. The exploded "diagram" that doesn't even acuaretly show how things properly go back in, and has a misspelling of the word safety, is worthless. I plan on hashing that out with S&W whenever they get back in the office, but I still doubt they will send me an armorers manual or tell me how. So I call on The Higher Road to come to my assistance!


    Thanks
     
    Last edited: Jan 1, 2003
  2. Sentry

    Sentry member

    Joined:
    Jan 1, 2003
    Messages:
    119
    Any information is better than what i have now though, so I'll take whatever is offered :)
     
  3. Sentry

    Sentry member

    Joined:
    Jan 1, 2003
    Messages:
    119
    Back to top, and Walther refuses to give me any information whatsoever.
     
  4. 4v50 Gary

    4v50 Gary Moderator Staff Member

    Joined:
    Dec 19, 2002
    Messages:
    18,988
    Off to George's place.
     
  5. Sentry

    Sentry member

    Joined:
    Jan 1, 2003
    Messages:
    119
    Walther refuses to tell me any information. Nothing. At all. Local gunsmith has never had one apart before so now I REALLY need everyones help...even pictures of the springs just in their regular places would be good.
     
  6. George Stringer

    George Stringer Member

    Joined:
    Dec 25, 2002
    Messages:
    33
    Location:
    Earlington, KY
    Sentry, I haven't seen a P22 except in pictures yet. I'm sorry but I have absolutely nothing on it. George
     
  7. jrhines

    jrhines Member

    Joined:
    Dec 24, 2002
    Messages:
    401
    Location:
    Williamsburg, VA
    By exploded diagram, I guess you are refering to the one in the P22 owners manual? (page 16?)

    J Rhines
    Seneca, MD
     
  8. Sentry

    Sentry member

    Joined:
    Jan 1, 2003
    Messages:
    119
    Yes, I am.
     
  9. walthertrouble

    walthertrouble Member

    Joined:
    Aug 2, 2006
    Messages:
    1
    walther support group

    hey sentry i hope u have been able to get ur walther back togather, i have had the same issues and have been trying for about 2 months to reassemble it, with no luck, i cant find diagrams or anything, i have it all reassembled except for the hammer assembly the sear springs and hammer springs are also my problem, any help, pics, drawings, ect. would b much appreciated.
    please email me back at s_minnich@yahoo.com or just reply on here, thanks , shawn
     
  10. Johnpl

    Johnpl Member

    Joined:
    Dec 30, 2002
    Messages:
    209
    Try the Walther forum at rimfirecentral.com. There was a sticky regarding detail stripping and reassembly. Hope this helps.
     
  11. kart racer

    kart racer Member

    Joined:
    Dec 15, 2004
    Messages:
    482
  12. kahr404life

    kahr404life Member

    Joined:
    Sep 21, 2005
    Messages:
    283
    Location:
    North Carolina
    I allways wanted to know how to take apart my P22.
     
  13. Shipwreck

    Shipwreck Member

    Joined:
    Mar 6, 2005
    Messages:
    3,633
    Location:
    Texas
Thread Status:
Not open for further replies.

Share This Page