Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pay it Forward in Reloading

Discussion in 'Handloading and Reloading' started by blarby, Jan 23, 2013.

  1. KansasSasquatch

    KansasSasquatch Senior Member

    Joined:
    Jul 22, 2012
    Messages:
    1,709
    Location:
    LV county KS
    I have 50+ pcs of .44mag brass, once fired. I don't remember the headstamps off the top of my memory but there's 2 headstamps. Roughly 50pcs of one headstamp and a few of the other. These were fired by my father and I'm not setup to reload them. I just ask that the taker pays for a small flat rate box, whatever those run these days. I might have some .30-06 or .40 brass laying around to fill the box up. .44 brass is gone

    edit: I also have 19pcs of once fired .270 brass. Just pay shipping.
     
    Last edited: Mar 11, 2013
  2. KansasSasquatch

    KansasSasquatch Senior Member

    Joined:
    Jul 22, 2012
    Messages:
    1,709
    Location:
    LV county KS
    I'll take the 5.7 and/or the 5.56 brass. I'll pay for a small flat rate box.
     
  3. Duztoff

    Duztoff New Member

    Joined:
    Nov 1, 2010
    Messages:
    23
    Location:
    Centeral South Carolina
    Kansas, 5.7 are yours, I offered the 5.56 to BRHBar. If he doesn't respond by tomorrow, I'll send both to you. Don't sweat the postage. PM me your address & I'll get them on the way.
     
  4. kingmt

    kingmt Senior Member

    Joined:
    Nov 17, 2009
    Messages:
    3,232
    That's the spirit.

    That one should have went to the buy, sale, & trade section tho.

    Just for the thread everyone it is a pay it forward so your giving to someone expecting them to give to someone else.
     
  5. Match10

    Match10 Member

    Joined:
    Nov 13, 2004
    Messages:
    108
    Finally found in the bottom of my stash... (In return for the .264 WinMag brass that must have gotten lost along the way, but no matter!)

    I have 50 pieces of .357 Rem Maximum. NOS and unfired.

    Free to good home.

    [​IMG]

    I also have a baggie of .38 Super, Nickel, once fired. Probably 50 pieces. Free to good home.
     
  6. Duztoff

    Duztoff New Member

    Joined:
    Nov 1, 2010
    Messages:
    23
    Location:
    Centeral South Carolina
    OK, just to bring the stuff that's still available to the front, here's what's left:

    1. 300 WSM - 6ea (I know, I know, not real impressive number, but 6 is better than none)
    2. 22-250 - 10

    I'll poke around some more tomorrow & update.
     
  7. grubbylabs

    grubbylabs Senior Member

    Joined:
    Feb 12, 2010
    Messages:
    1,854
    Location:
    Hansen Idaho
    I have a set of RCBS 257 Roberts dies that I just remembered I have, they were given to my by my boss because I reload, but I don't have a 257 Roberts.

    Free to a good home, they look really nice.

    I might also have some 270 brass
     
  8. Savage Shooter

    Savage Shooter Member

    Joined:
    Jan 3, 2008
    Messages:
    677
    Location:
    Plymouth,Illinois
    12pk of scorpion pt gold .50 cal sabot muzzle loader bullets uses a .45 cal 260gr bullet.
     
  9. grubbylabs

    grubbylabs Senior Member

    Joined:
    Feb 12, 2010
    Messages:
    1,854
    Location:
    Hansen Idaho
    257 Roberts Dies are spoken for.

    they are going to westy16925
     
  10. medalguy
    • Contributing Member

    medalguy Senior Member

    Joined:
    Mar 20, 2009
    Messages:
    3,174
    Location:
    New Mexico
    Match10, if no one needs the .38 Super brass I can use it. PM inbound.
     
  11. Beentown

    Beentown Member

    Joined:
    Jan 20, 2011
    Messages:
    468
    New to reloading (yet to be able to pull the handle and make my first round) and just wanna applaud you guys in this thread. As a new loader it has been VERY frustrating and this is refreshing.

    Good on ya!
     
  12. Match10

    Match10 Member

    Joined:
    Nov 13, 2004
    Messages:
    108
    It's yours. I have your address.
     
  13. holdencm9

    holdencm9 Senior Member

    Joined:
    Oct 25, 2011
    Messages:
    1,369
    This is such a great thread. You guys are all so generous. I am not exactly "component-poor" but I am definitely not component-rich either, that I have accumulated much stuff to give away.

    I do have a couple hundred .40s&w brass collected, deprimed (not resized) and clean (using the ol' vinegar water method, I can't attest to spotless primer pockets!).

    Anyone cares for them, PM me.


    ETA: Spoken for.
     
    Last edited: Mar 12, 2013
  14. Bmac1949

    Bmac1949 Member

    Joined:
    Jan 3, 2011
    Messages:
    283
    Location:
    Crockett Texas
    I'm good for a 100 170gr rn lead bullets. 30 cal. no gas checks, I'm out. PM for details.
     
  15. holdencm9

    holdencm9 Senior Member

    Joined:
    Oct 25, 2011
    Messages:
    1,369
    poor man,

    .40s&w cases in the mail, on their way!
     
  16. poor man

    poor man Member

    Joined:
    Nov 6, 2007
    Messages:
    258
    Location:
    Tn.
    thanks with what you send and the others i got here im set for loading the box of lead i bought the other day !!!
     
  17. kyhunter

    kyhunter Member

    Joined:
    Feb 21, 2013
    Messages:
    285
    Location:
    western ky
    Baryngyl, Thanks for the '06 brass ti arrived today. Much appreciated good sir :cool:
     
  18. Boostedtwo

    Boostedtwo Member

    Joined:
    Oct 30, 2012
    Messages:
    163
    Anyone have a powder scale they would let go of cheap?
     
  19. bds

    bds Senior Member

    Joined:
    Jan 10, 2010
    Messages:
    12,339
    Location:
    Northwest Coast
    Boostedtwo, you can have my Lee Safety Scale if you are interested ... but it will teach you a lesson in patience.

    But it will detect a 1/4"x1/4" piece of copy paper ... a feat only doable by Ohaus/RCBS 10-10 and barely by 5-0-5 and similar scales.
     
  20. Centurian22

    Centurian22 Senior Member

    Joined:
    Dec 22, 2011
    Messages:
    1,233
    Location:
    Maine
    Bumping this and getting it back in my notifications.
    Also I'll offer 50 plated 100gr flat nose .32 cal (.312 dia) bullets for anyone who needs them. I'm loading them in my .32S&W Long but can spare a few.

    Edit: .32's are claimed.
     
    Last edited: Mar 14, 2013
  21. Boostedtwo

    Boostedtwo Member

    Joined:
    Oct 30, 2012
    Messages:
    163
    Bds I'm very interested
     
  22. bds

    bds Senior Member

    Joined:
    Jan 10, 2010
    Messages:
    12,339
    Location:
    Northwest Coast
    Boostedtwo, I will be shipping the scale out by Saturday.
     
  23. Match10

    Match10 Member

    Joined:
    Nov 13, 2004
    Messages:
    108
    I have 25 .50AE Nickel Speer Cases that appear to be once fired for anyone who needs them.
     
  24. Godsgunman

    Godsgunman Member

    Joined:
    Feb 14, 2012
    Messages:
    631
    Location:
    Olathe, KS
    Still looking for .357 mag brass. I will pay for the shipping or I could trade 9x19 brass since I am not reloading that at this time.
     
  25. 45lcshooter

    45lcshooter Member

    Joined:
    Oct 6, 2012
    Messages:
    919
    Location:
    Central of the Commonwealth of PA
    Been looking for 32acp bullets for a long while. 72gr. Anyone has any to trade off, I will trade brass of various caliber. PM me (so this thread doesn't get cluttered with conversation)with the quantity of 32acp bullets you have, and what caliber brass you would like(I may have it) if I don't have the brass you would like, I'll pay shipping for the bullets as a PIF.
     

Share This Page