Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pay it Forward in Reloading

Discussion in 'Handloading and Reloading' started by blarby, Jan 23, 2013.

  1. slowr1der

    slowr1der Member

    Joined:
    Mar 25, 2010
    Messages:
    930
    Ok, for my PIF I have a Lee seater die for a .243 Winchester if anyone can use it. I think I posted this before.

    I also have a Lyman 22-250 sizing die. The die is in good shape, but the piece that holds the decapping pin onto the rod needs to be replaced. This is just the little thin metal piece that screws onto the rod to hold the decapping pin. I'm not sure what it's called, but it's cracked so it doesn't screw on tight. Lyman may send you a replacement one of these for free, I'm not sure. I know the other companies would, but I've never called just because this was an extra die for me.

    If anyone needs either of these, just let me know.
     
  2. blarby

    blarby Senior Member

    Joined:
    Feb 25, 2011
    Messages:
    5,142
    Location:
    Calapooia Oregon
    A pack of 44 bullets goes out in the AM to paulsnap !

    Roundballs it sounds like were recieved by PoorMan !

    Gosh, I hate being so busy- I wish I could do more !
     
  3. Godsgunman

    Godsgunman Member

    Joined:
    Feb 14, 2012
    Messages:
    631
    Location:
    Olathe, KS
    Looking for some .357 mag brass and/or small pistol primers. I do have 9mm brass I can trade or even some WWB 124 gr ammo.
     
  4. ldlfh7

    ldlfh7 Member

    Joined:
    Feb 12, 2013
    Messages:
    687
    Godsgunman -- I just sold my 357 and have a nice stash of brass I saved from it. I have 357 and 38 special. I would be very interested in trading for 9mm brass. Unfortunately I cannot help with the primers. PM me for details.
     
  5. Bruno2

    Bruno2 Member

    Joined:
    Aug 3, 2009
    Messages:
    885
    Location:
    Tulsa , Oklahoma
    OK, I have :

    10 pcs of 30-06
    4 pcs of 270

    5 pcs of 25 ACP
    65 pcs of 32 auto

    11 pcs of 357 Sig
     
  6. kyhunter

    kyhunter Member

    Joined:
    Feb 21, 2013
    Messages:
    285
    Location:
    western ky
    Bruno2 what headstamp is '06. id gladly take it off your hands
     
  7. bds

    bds Senior Member

    Joined:
    Jan 10, 2010
    Messages:
    12,331
    Location:
    Northwest Coast
    Paying forward .223 brass and bullets to mebe007. ETA 6/12 - 6/13.
     
  8. swampcrawler

    swampcrawler Member

    Joined:
    Jun 3, 2013
    Messages:
    445
    This is verycool. Il play. :D

    I have a good bit of once fired 9mm brass. At least a few hundred. I tumbled it but never deprimed it. I have a few other odds and ends but mostly juts a piece ot two of this or that. Let me know you need it and it's yours.

    However, I have a 357 maximum barrel on the way for my contender. I found a little brass for sale here on the forum. But Im looking for some 358 180 gr pills for it. Can seem to find any in stock anywhere.
     
  9. flgolfer29

    flgolfer29 New Member

    Joined:
    Sep 3, 2010
    Messages:
    97
    Location:
    Panama City
    I could use some 9mm brass as I've just started loading 9mm lead.

    Joe
     
  10. mac tm

    mac tm New Member

    Joined:
    Jul 6, 2011
    Messages:
    67
    Location:
    NE Iowa
    I am a new reloader looking for some 45 acp brass. Everyone at my range must reload too, the only brass to pick up is 22!
     
  11. swampcrawler

    swampcrawler Member

    Joined:
    Jun 3, 2013
    Messages:
    445
    Sorry golfer, spoken for by kostyanj (had to go back and look at that like 3 times to make sure i spelled it right)
     
  12. bds

    bds Senior Member

    Joined:
    Jan 10, 2010
    Messages:
    12,331
    Location:
    Northwest Coast
    Paying it forward to RussellC 9mm brass. ETA 6/12 - 6/13.

    flgolfer29, PM me your address for 9mm brass.

    mac tm, PM me your address for 45ACP brass. I have both large and small primer pocket cases - Your choice.

    PM's sent.


    ole farmerbuck, thanks very much for the offer. I will let you know how the trip goes! :D
     
    Last edited: Jun 10, 2013
  13. mac tm

    mac tm New Member

    Joined:
    Jul 6, 2011
    Messages:
    67
    Location:
    NE Iowa
    PM sent to bds, thank you.
    I will dig through my small stash to see what I have to offer. I know there are some .40 s&w cases in there for which I have no gun.
     
  14. flgolfer29

    flgolfer29 New Member

    Joined:
    Sep 3, 2010
    Messages:
    97
    Location:
    Panama City
    PM send to bds for 9mm brass.

    Thank you kindly!

    Joe
     
  15. bds

    bds Senior Member

    Joined:
    Jan 10, 2010
    Messages:
    12,331
    Location:
    Northwest Coast
    Paying it forward to mac tm large primer pocket 45ACP cases. ETA 6/13 - 6/14.

    Paying it forward to flgolfer29 9mm cases. ETA 6/13 - 6/14.
     
  16. Springfield0612

    Springfield0612 Member

    Joined:
    Feb 10, 2011
    Messages:
    121
    Location:
    Kingston, Wa
    Bruno2, I'd gladly take the .32 ACP off of your hands!

    I'll put up:

    9mm MAK 14ea
    45 GAP 21 ea
    44 Rem Mag 7 ea
     
  17. Spammy_H

    Spammy_H Member

    Joined:
    Dec 29, 2010
    Messages:
    142
    I have 2 boxes of Hornady 185 grain XTP .452 100 count bullets.

    I need the following:

    Berry's plated .400 180 grain FP

    Berry's plated .452 230 grain RN

    Small Pistol Primers
    Large Pistol Primers

    I know the primers are a long, long, long shot, but I need them, so I figured I'd ask to see if anyone in the Nashville area has any for FTF exchange.

    I may be able to scare up some brass, but I'll put that in a separate post.
     
  18. v8stang289

    v8stang289 Member

    Joined:
    Oct 1, 2006
    Messages:
    435
    Location:
    Eastern NC
    Spammy_H I'll take one of the boxes of 185gn xtp's if they aren't already spoken for.
    Thanks
     
  19. Bruno2

    Bruno2 Member

    Joined:
    Aug 3, 2009
    Messages:
    885
    Location:
    Tulsa , Oklahoma
    You got it Springfield! PM me your mailing info.
     
  20. Bruno2

    Bruno2 Member

    Joined:
    Aug 3, 2009
    Messages:
    885
    Location:
    Tulsa , Oklahoma
    Here is the updated list:
    4 pcs of 270
    5 pcs of 25 ACP
    11 pcs of 357 Sig

    I also found something in my bag like 35 Remington(2 pcs) if there is such a thing?
     
  21. TenDriver

    TenDriver Senior Member

    Joined:
    Jun 29, 2009
    Messages:
    1,205
    Location:
    Huntsville, AL
    Anyone need a #2 shell holder for a Lee Quick Trim gage? I have an extra you're welcome too.
     
  22. gonefishin1

    gonefishin1 Member

    Joined:
    Feb 15, 2013
    Messages:
    185
    Location:
    houston
    if there is anyone local to me spring tx area I have a few cci srp to help out someone in need not just to fill someones stockpile.... I also have some swagged bullets made from used 22 shells. I bought 200 and decided not to use them. they are sized to .226 so I didn't want to use them. if your not scared of them then they are yours.
     
  23. Rule3

    Rule3 Senior Member

    Joined:
    Jan 26, 2010
    Messages:
    4,796
    Location:
    Florida
    I am not sure how this all works but I just started loading 30-30. I only have a few (30) cases and could use some more. I can not believe there is a shortage of 30/30 but I sure can not find any for sale??

    I have lots of 38 special once fired brass (several headstamps) if anyone needs it or to trade or however this works:)
     
  24. jwrowland77

    jwrowland77 Senior Member

    Joined:
    Apr 8, 2012
    Messages:
    2,293
    Location:
    Central Arkansas
    Not sure how this works but here's what I'm looking for in a bad way.

    I need: Hornady LnL .308 Win modified case to use with my Hornady OAL gauge.

    I have: Lyman primer pocket reamer (small)
     
  25. Havok7416
    • Contributing Member

    Havok7416 Senior Member

    Joined:
    Apr 24, 2012
    Messages:
    1,773
    Location:
    Ohio, Indiana and soon Kentucky
    I just scooped up some once fired brass today at the range. I will count it and get it back to you.
     

Share This Page