Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Picked up a S&W 629-6 (.44 Magnum) yesterday at the local gun show.

Discussion in 'Handguns: Revolvers' started by jrb_pro, Oct 4, 2010.

Thread Status:
Not open for further replies.
  1. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Brand new. $549. :cool:

    I thought it was a really good deal.

    For you .44 guys, what is your preferred load for hunting (white tail), for the range, and for personal protection? I'm new to the caliber, so just wanted to ask (and before you ask, yes, I have shot .44s before...just never owned one).

    [​IMG]

    [​IMG]
     
  2. Buck Snort

    Buck Snort Member

    Joined:
    Oct 5, 2004
    Messages:
    1,171
    Location:
    N. CA.
    Looks to me like you got a really good deal there. For SD I'm partial to the Cor Bon 165gr JHP that I've clocked out of my 4" 629 at 1300 fps.
     
  3. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    I'll check out that ammo. Thanks for the reply! :)
     
  4. youngda9

    youngda9 member

    Joined:
    Aug 21, 2008
    Messages:
    877
    That's a great deal. I picked up a pre-lock 629-4 classic 6" for $500...with tax and shipping(bought it out of state) and FFL fees it cost me $575 total which was still a sweet deal.

    Just starting to shoot mine. Bought an X-grip for it because that exposed metal backstrap just hammers your hand. I've yet to shoot it with the new grip. Sweet gun!
     
  5. racine

    racine Member

    Joined:
    Sep 14, 2009
    Messages:
    111
    Location:
    Colorado
    Sweet Deal!!!

    Wow, Wow!
     
  6. huntershooter

    huntershooter Member

    Joined:
    Dec 4, 2005
    Messages:
    1,058
    A 6" mod. 629 is a good hunting revolver. Mine happens to a be 4" example.
    I use a cast WFNGC (wide, flat nose, gas check) 255 gr. bullet over a charge of 2400 powder for 1200+ FPS (4" barrel).
    This is the accuracy load from my gun and is a handful.

    Something you might check if yours is a 629-6:
    The chamber throats on mine were "stupid tight" from the factory; .4275" from memory. A jacketed .429" bullet would not pass through the throats with finger pressure.
    S&W's response was "a jacketed bullet is springy enough that the bullet will obturate when entering the bore". Horse****.
    Jacketed bullet accuracy was mediocre and cast bullet accuracy was terrible.
    I purchased a finish throat reamer and opened the throats to .4305".
    My preferred cast bullets will shoot into 1-1.25" at 25 yds., that's all six chambers.


    [​IMG]

    [​IMG]
     
  7. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    I appreciate the heads up on that. I'll have to check it out. I suspect that mine is the same.
     
  8. ultradoc

    ultradoc Member

    Joined:
    May 20, 2008
    Messages:
    1,118
    Location:
    Ohio
    congrats on the nice buy.
     
  9. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Just got back from the range. Put four of the first six shots through the bullseye from 15 yards (I know that may not be impressive to most of you, but it's pretty nice for me...haha). *REALLY* like the gun, and I've very glad I got the 6" barrel.
     
  10. huntershooter

    huntershooter Member

    Joined:
    Dec 4, 2005
    Messages:
    1,058
    Congrats on a great hunting revolver. The 6" is easier for me to shoot, but not as "handy" as a 4".
    If you're planning on this being a Whitetail gun here's a recommendation;
    Sight in and shoot at 50 yds. My self imposed limit is 30+ yds. offhand, maybe out to 50 with a solid rest.
    If you use 8" paper plates and practice offhand and "field positions" you will discover how difficult it can be to place six rds. on target under varying conditions and positions.
    A good way to discover your limitations and what you need to work on.
     
  11. Stainz

    Stainz Member

    Joined:
    Apr 24, 2003
    Messages:
    3,117
    Location:
    Pinson, AL
    My first 629-6 purchased new was a 6" in 8/05. I replaced my 629MG the next year with a new 4" producion 629-6. Both have consistent chamber exit bores ~.430". I have replaced the rear sight on the 6"-er several times with a Weigand SS Weaver-style rail, using blue Loctite on the screws. The scope I used was a Weaver H2 2x28mm handgun scope, which allows it's cross hairs to match the diopter needs of my prebsbyopic eyes. I can ping a 12"-16" steel plate at 110yd 6 of 6 shots with both .44 Specials and .44 Magnums, hand holding the revolver. Equipped with the Hogue/S&W .500 Magnum X-frame grips, which fit K, L, N, & X frames, the backstrap is padded for better recoil control ($38 from S&W Accessories.). Wood grips are fine for .44 Russians and Specials, of course.

    [​IMG]

    Not knowing what kind of factory ammo I might try in the 6"-er, I put a full strength Wolff hammer spring and a reduced power rebound spring in it - both reduced power springs in the 4"-er. I keep HKS #29 speedloaders filled with Georgia Arms 200gr Gold Dots in .44 Special new brass cases ready for either 629 for home defense. This is chronologically equivalent to the Al cased Blazers. The scope rail generally doesn't stay on the 6"-er long - I really prefer the iron sights. The 6" is a great plinker!

    Stainz

    PS That 6" 629-6, SKU #163606, was $569 new locally 8/05 - the 'good old days'. To quote Dylan, "The Times, They are a Changing!".
     
  12. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Thanks for the info guys! Very cool.
     
  13. Damon555

    Damon555 Member

    Joined:
    Jul 7, 2008
    Messages:
    857
    Location:
    The south
    180 grain JHP in front of a large dose of H110. Kills whitetails dead.
     
  14. 788Ham

    788Ham Member

    Joined:
    Sep 24, 2010
    Messages:
    3,206
    Location:
    Hills west of Denver
    Good luck with your piece jrb, you'll like it.

    huntershooter, what make of grips have you got on that hog leg? Beautiful grips! The Houge, pao ferro mono grip is on my 629-1 6", really dressed it up.
     
    Last edited: Oct 7, 2010
  15. jakk280rem

    jakk280rem Member

    Joined:
    Feb 12, 2007
    Messages:
    1,326
    Location:
    Astoria, OR
  16. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Yeah, those are really sweet looking.
     
  17. huntershooter

    huntershooter Member

    Joined:
    Dec 4, 2005
    Messages:
    1,058
    Yes sir, Herrett's "Trooper" that have been modified.
     
  18. springmom

    springmom Member

    Joined:
    Dec 20, 2005
    Messages:
    3,599
    Location:
    Spring TX
    Oh my, that is a NICE revolver. Jealousy here.

    Jan
     
  19. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Spring, TX! My former home away from home for the last four years. Not anymore though. Nice area.
     
  20. Confederate

    Confederate Member

    Joined:
    Feb 19, 2005
    Messages:
    3,138
    Location:
    Bethesda, MD
    The 629 is one of the finest pistols S&W ever produced, especially the early models. It represents the fine qualities of its other revolvers, but does so on a large basis.

    For sheer show & tell, I'm fascinated by size. The very small guns (autos) produced by Beretta, and the large revolvers made by S&W, reflect a diminishing craftsmanship.

    To me, there's something fascinating about making a very small (tiny) gun work reliably. Think what novelties such guns would be if they were just now coming on the scene. "Is that a toy?" "Does it really shoot?" people might say.

    The .44 DA revolver made by S&W also was a novelty when it first appeared. People had to have one. It looked like other great revolvers S&W had produced; it was just big. And it gave S&W fans the chance to examine their revolvers in great detail. And of course there was the hype about power.

    Alas, the novelty wore off quickly, and reports soon began coming in of guns on consignment, with partially shot boxes of ammo thrown in.

    The 629 also was a great novelty when it appeared. Gun magazines showed two-page spreads of the gun with water droplets on it to show outdoorsmen that it stood up to rain, sleet and snow. People had to wait on very long waiting lists that were more ke a lottery. One fellow in a gun store had one, I thought, until I learned it had been hard chrome plated. I was on a list for well over a year. Then came the call. Although there were no waiting periods in those days, the store's proprietor made me wait a few days for mine. When I finally came in to pick it up, I felt like a rock star. People in the store all wanted to touch it or heft it. One offered me a substantial profit if I wanted to sell it, but I declined.

    I still have that 629 and it's never been fired. It's as beautiful as the first day I bought it. It's got counterbored chambers, stamped side plate, pinned barrel and smooth wood grips. I keep it mostly for sentimental reasons and for the story.

    Enjoy yours!
     
  21. jrb_pro

    jrb_pro Member

    Joined:
    Oct 4, 2010
    Messages:
    67
    Cool story! How much profit did the guy offer you?
     
Thread Status:
Not open for further replies.

Share This Page