Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pics of your...

Discussion in 'Rifle Country' started by josiewales, Nov 25, 2012.

Thread Status:
Not open for further replies.
  1. jmorris

    jmorris Member

    Joined:
    Sep 30, 2005
    Messages:
    9,563
    Out of all the ones I have I shoot this one the most.

    1022.jpg
     
  2. Water-Man

    Water-Man Member

    Joined:
    Mar 22, 2008
    Messages:
    2,323
    Location:
    N. Georgia
    .............
     
    Last edited: Feb 21, 2013
  3. kimberkid

    kimberkid Member

    Joined:
    Feb 5, 2010
    Messages:
    1,106
    Fagen Stock, Midway/Clark barrel, polished factory trigger

    Ruger_1022_Custom.jpg
     
  4. SaxonPig

    SaxonPig Member

    Joined:
    Apr 11, 2006
    Messages:
    4,787
    Had this one for about 30 years and except for the scope it remains as issued. Never felt the need for doodads and such.


    standard.jpg


    Besides, it seems to shoot OK as is... Two 5 round groups at 50 yards rapid fire.


    standard.jpg
     
  5. whitefeather

    whitefeather Member

    Joined:
    Jan 19, 2006
    Messages:
    124
    Ruger USA Shooting Team Stock
     

    Attached Files:

  6. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    15,033
    Location:
    West Tennessee
    If I had a stock carbine that shot like that, I wouldn't change anything either. Most folks have to install a new barrel to get accuracy like that. Most of these guns don't shoot that well.
     
  7. savanahsdad

    savanahsdad Member

    Joined:
    Jul 28, 2012
    Messages:
    1,287
    Location:
    WI
    still working on it ???
     
  8. roklok

    roklok Member

    Joined:
    Aug 10, 2009
    Messages:
    173
    Location:
    Alaska
    A couple working 10-22s in the Alaskan bush, a long long way from civilization.
     

    Attached Files:

  9. josiewales

    josiewales Member

    Joined:
    May 1, 2011
    Messages:
    694
    Well, it's like this: I am going to an auctioneering course at Harrisburg Area Community College, and that cost money and lots of it. Soooo, yea I guess I am.

    That poor '94! :*(
     
  10. goldie

    goldie Member

    Joined:
    Oct 19, 2006
    Messages:
    507
  11. josiewales

    josiewales Member

    Joined:
    May 1, 2011
    Messages:
    694
    goldie, that is a GORGEOUS rifle!!
     
  12. earlthegoat2

    earlthegoat2 Member

    Joined:
    Aug 28, 2008
    Messages:
    4,514
    Location:
    SE GA
    It would be a crime to customize this any more than it already is. Williams sights is all.

    SDC11413.gif
     
  13. Mr.510

    Mr.510 Member

    Joined:
    Dec 29, 2007
    Messages:
    485
    Location:
    Belfair Washington
    2013-02-24_13-13-31_866_zps5fe05a9c.jpg

    This is my beloved 1984 Ruger 10/22. It was my first firearm, purchased from a pawn shop in Seattle the day after my 18th birthday for $60, in 1987. All the 10/22s I'd seen to that point had either dark stained stocks or had been tacticooled out with a bunch of plastic crap and I wanted something different. I went looking specifically for a rifle whose barrel and receiver were in good shape with a beat up stock I could refinish - to save money. You can't really tell in the pic but I re-shaped the stock a bit while sanding the dents out and rounded off all the edges. Then I bedded the barrel into the stock using a kit from Gander Mountain followed by about ten coats of Tru-Oil. I re-shaped and polished the trigger, de-burred and smoothed every moving part, and mounted a Bushnell 2.5-10x scope. I installed a Ram-Line extended mag release and a stainless butt plate, it's otherwise 100% original parts. I did this in the weeks following it's purchase and have never had reason to modify it further. I don't know how many tens of thousands of rounds have been through it but it still shoots groups the size of a dime at 50 yards with decent ammo. :)
     
  14. nipprdog

    nipprdog Member

    Joined:
    Feb 20, 2004
    Messages:
    1,221
    Location:
    IN
    Agreed. It just needs lower scope rings. :D
     
  15. Reloadron
    • Contributing Member

    Reloadron Member

    Joined:
    Jul 6, 2012
    Messages:
    6,949
    Location:
    Cleveland, Ohio USA
    I am another one of those people who leaves off the tacticool stuff. The background pictured rifle is the 10/22. Not sure why the scope was off when I took the picture. :) Just a plain Jane rifle that shoots just fine.

    22%20and%2044.png

    Ron
     
  16. CH47gunner

    CH47gunner Member

    Joined:
    May 20, 2007
    Messages:
    363
    Location:
    Santa Cruz, Ca.
    This is from too much hanging out at rimfirecentral.
    What started out as a stock 10/22, purchased around 1975, that I had intended to only accurize a bit. When finished there were no Ruger parts left. I had even replaced the receiver with a VQ SuperLite as after buying all the internal VQ parts I decided they deserved a tighter home than the original Ruger receiver.

    Bruce

    Parts:
    Volquartsen SuperLite receiver
    Green Mtn. 20" Match barrel
    Fajen stock w/ VQ bedding kit
    Volquartsen TG2000 trigger group
    Volquartsen Machined bolt
    Volquartsen Buffer
    Volquartsen Compensator
    Mueller 8.5-25x44 scope
    Warne Maxima QT rings

    Here you go - Custom 10/22
    P9010001.jpg
    P9010006.jpg
    P9010002.jpg
    P9010008.jpg
     
    Last edited: Feb 24, 2013
  17. josiewales

    josiewales Member

    Joined:
    May 1, 2011
    Messages:
    694
    Gunner, what size groups do you get at 100 yards? Very nice rifle.
     
  18. MattShlock

    MattShlock Member

    Joined:
    Jan 25, 2013
    Messages:
    787
    Liberty Training Rifle

    ...and a bit more.
     

    Attached Files:

  19. 4sixteen

    4sixteen Member

    Joined:
    Apr 8, 2012
    Messages:
    45
    Location:
    Up North
    My 10/22 with a Ram-Line stock and Nikon Monarch 1.5x4.5 scope -

    1022RL.jpg
     
  20. josiewales

    josiewales Member

    Joined:
    May 1, 2011
    Messages:
    694
    ......
     
    Last edited: Feb 28, 2013
  21. josiewales

    josiewales Member

    Joined:
    May 1, 2011
    Messages:
    694
  22. saenzrich

    saenzrich Member

    Joined:
    Aug 6, 2010
    Messages:
    436
    Location:
    Austin,Tx.
    10/22 Target with Hogue stock and Vortex Crossfire II 4-12x42 1022004_zps210bae40.jpg
     
  23. towerdog

    towerdog Member

    Joined:
    Jan 9, 2012
    Messages:
    50
    Location:
    Charlotte, MI
    Here is a quick picture of mine and the kids.

    photobucket-19911-1362161425892_zps6f92d025.jpg
     
Thread Status:
Not open for further replies.

Share This Page