Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Plans for my PTR 91F

Discussion in 'Rifle Country' started by SoCalShooter, Feb 12, 2009.

Thread Status:
Not open for further replies.
  1. SoCalShooter

    SoCalShooter Member

    Joined:
    Oct 3, 2006
    Messages:
    3,091
    Location:
    That's for me to know and not you!
    Love the gun even though I have not fired my own but I want to make some changes to it to and turn it into a SASS/DEER/VARMINT rifle. I was wondering if anyone has ever ordered anything from this website.

    http://www.robertrtg.com/g3.html

    I wanted to get the FOREND with the bipod and the low profile scope mount along with the carry handle. I planned to mount a BURRIS XTR on top when I get these accessories and was also going to change out to the MAGPUL stock.

    Suggestions and links or pictures of your own would be great thanks.

    These are the direct links to the products.
    http://www.robertrtg.com/pofg3blackwide.html

    http://www.robertrtg.com/pofport_carry.html

    http://www.robertrtg.com/hklowprofilescopemount.html
     
  2. Monkeybear

    Monkeybear Member

    Joined:
    Jan 27, 2006
    Messages:
    1,178
    Robert RTG is awesome. I don't think you will find anyone who says differently. Also be sure to order some mags.I ordered these and after painstakingly going through 104 mags I decided to keep them all. If nothing else you can salvage the springs. I would also grab a NIB locking piece and some spare parts like a firing pin/spring.

    Just my personal preference but I would stick to iron sights with the PTR. If a scope suits you then smack a scope on it but for me a scope on a PTR is all wrong. The fact that it has a 18" barrel just makes it worse. That said, I don't really like a scope on any rifle not specifically designed for long range. Close to mid deserve irons.
     
  3. HeavenlySword

    HeavenlySword Member

    Joined:
    Nov 6, 2008
    Messages:
    377
    Location:
    New Yorkistan
  4. Bugflipper

    Bugflipper Member

    Joined:
    Feb 13, 2009
    Messages:
    26
    Just ordered some parts from Robert. He's the best guy I've found for a 91 source. Very good guy. Your setup looks like it will work great. May I suggest,,,,,,,,,,,,
    http://www.triggerwork.net/hk9xrifles.html
    Another A+ guy to deal with. He does an exceptional job.
    Blessings
     
  5. DRYHUMOR

    DRYHUMOR Member

    Joined:
    Jul 6, 2008
    Messages:
    1,966
  6. Floppy_D

    Floppy_D Member In Memoriam

    Joined:
    Jul 4, 2007
    Messages:
    2,156
    Location:
    NAS Pensacola
    I've ordered from Robert before, he's a good guy to deal with. You might try it with irons before jumping on the scope; they have good sights.
     
  7. sublimaze41

    sublimaze41 Member

    Joined:
    Jul 28, 2007
    Messages:
    583
    Location:
    Peoples Republic of Western New York
    Great thread, I have been looking for one like this.
    My PTR91 needs some new clothes!
     
  8. stubbicatt

    stubbicatt Member

    Joined:
    Aug 23, 2007
    Messages:
    3,413
    Location:
    Colorado
    Buy with confidence from RTG parts.

    As far as scopes go, the Hensholdt Fero-Z scope is a great value and was made for this rifle.

    Mine wears two sets of clothes: one the old wood stock set, the other the wide forearm with light bipod and a Magpul PRS stock. I use the Magpul for shooting with the scope, and the wood when shooting Irons.

    The wood must lighten the rifle by well over 2 pounds, and it just feels good in the hands.
     
  9. SoCalShooter

    SoCalShooter Member

    Joined:
    Oct 3, 2006
    Messages:
    3,091
    Location:
    That's for me to know and not you!
    WOW!!! Thanks for all the feed back guys I will definitely be able to buy with confidence from Robert G and I never even thought about getting and EXTRA firing pin/spring.

    I saw HKPARTS but they seem to be out of stock on things..


    ACOG sounds like a great idea do you have any suggestions on what model?
     
    Last edited: Feb 13, 2009
  10. Monkeybear

    Monkeybear Member

    Joined:
    Jan 27, 2006
    Messages:
    1,178
  11. TexasRifleman

    TexasRifleman Moderator Emeritus

    Joined:
    Feb 16, 2003
    Messages:
    18,302
    Location:
    Ft. Worth
    Another positive review for Robert. I buy stuff from him all the time, never had a single problem.

    Good source for mags too. I bought a bunch of his used alloy mags, dirt cheap and they have all worked perfectly.
     
  12. Floppy_D

    Floppy_D Member In Memoriam

    Joined:
    Jul 4, 2007
    Messages:
    2,156
    Location:
    NAS Pensacola
    100_1977.jpg
    Obligatory pic of furniture and mag from Robert. (There were about 19 other unpictured mags) :D
     
  13. SoCalShooter

    SoCalShooter Member

    Joined:
    Oct 3, 2006
    Messages:
    3,091
    Location:
    That's for me to know and not you!
    Floppy_D thanks so much that is a great pic!!

    I did not know the Hensoldt scopes were that great or even decent like I said I planned on putting a BURRIS XTR 50mm objective on it.
     
Thread Status:
Not open for further replies.

Share This Page