Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Plated 7.62x39 HELP!!!!!!!!!!!!

Discussion in 'Handloading and Reloading' started by jeeptim, Apr 3, 2010.

Thread Status:
Not open for further replies.
  1. jeeptim

    jeeptim Member

    Joined:
    Mar 27, 2010
    Messages:
    575
    Location:
    California
    Bought 500 Berry's plated .311/110gr to load in my sks tested a few at around 1700 fps with no luck cycling the action anybody offer a lil help my kid wants to shoot em with his sling shot. Thanx
     
  2. R.W.Dale

    R.W.Dale Member

    Joined:
    Oct 14, 2005
    Messages:
    11,375
    Location:
    Northwest Arkansas
    it's very very doubtful that you'll get these to cycle the action loaded loaded withing velocities acceptable for plated bullets.

    My advice would be to shut off the gas valve (yugo) or remove the gas piston and treat this load as if you were shooting a straight pull repeater
     
  3. jeeptim

    jeeptim Member

    Joined:
    Mar 27, 2010
    Messages:
    575
    Location:
    California
    Thanx for the info and the e-mails
     
Thread Status:
Not open for further replies.

Share This Page