Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

POSP 4x26 for SVD

Discussion in 'Rifle Country' started by Browns Fan, Jun 2, 2009.

Thread Status:
Not open for further replies.
  1. Browns Fan

    Browns Fan Member

    Joined:
    Apr 18, 2003
    Messages:
    1,145
    Location:
    North Carolina
    This scope is designed for the SVD sniper rifle. Will it fit onto a basic AK47 or Saiga? Are the side mount for these rifles identicle? Is there a difference in how high it sits over the dust cover?

    Thanks,
    Joe
     
  2. briansmithwins

    briansmithwins Member

    Joined:
    Aug 1, 2005
    Messages:
    4,132
    SVD and AK are different mounts. AK slides on from the back while the SVD slides on from the front. BSW
     
  3. Boris Barowski

    Boris Barowski Member

    Joined:
    Dec 16, 2007
    Messages:
    249
    Location:
    Belgium
  4. Maverick223

    Maverick223 Member

    Joined:
    Dec 19, 2008
    Messages:
    11,269
    Location:
    28078
    I think you can drill out the old mount and install a SVD style mount to a Saiga (think I remember talking to someone that did just that, but not sure). FWIW I wouldn't go through the effort of doing the conversion, just get the VEPR style or a conventional scope and P. rail mount for the side mount you already have. :)
     
  5. Browns Fan

    Browns Fan Member

    Joined:
    Apr 18, 2003
    Messages:
    1,145
    Location:
    North Carolina
    Thanks, guys!

    Joe
     
  6. NC-Mike

    NC-Mike Member

    Joined:
    Mar 11, 2007
    Messages:
    1,228
    Not really.

    The easiest way to tell the difference between the mounts is the angles on the bottom rail. If you are putting a SVD rail on from the front, you're doing it wrong. There is a stop pin at the front that must be against the front edge of the rifle's rail to stop the scope from moving forward.

    Many people are using a SVD mount on an AK rail. In which case, the ONLY way to get it on is from the front but the mount will loosen under recoil.


    AK mount. Notice how the bottom edge of the rail is straight across.
    [​IMG]

    SKS/SVD mount. Notice the angle on the back edge of the bottom rail.

    [​IMG]




    Here is someone with a SVD mount on an AK. Headaches will commence
    shortly.

    [​IMG]

    Another view
    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page