Quantcast

Post pics of your "tactical" Mosin Nagant

Discussion in 'Rifle Country' started by Marine_wannabe, Jan 14, 2009.

Thread Status:
Not open for further replies.
  1. Roscoe57

    Roscoe57 Member

    Joined:
    May 30, 2010
    Messages:
    4
    Location:
    Pensacola, FL USA
    Hmmm some more bubba-ized than others. :eek:
     
  2. Lorenzo Rojo

    Lorenzo Rojo Member

    Joined:
    Apr 12, 2010
    Messages:
    102
    Location:
    Seventy miles Northwest of the OK Corral
    My Siberian Tiger

    "Scouterized M44"

    thebusinessend.jpg
     
  3. Antihero

    Antihero Member

    Joined:
    Nov 23, 2006
    Messages:
    1,100
    Try closer to 37 million than 17 million.
     
  4. Palehorseman

    Palehorseman Member

    Joined:
    Feb 28, 2009
    Messages:
    737
    This is a pre-bubarized MN I got off neighbor for 25 bucks. Only thing I have done to it is a $15.00 scout mount (from http://www.htownimports.com/ ) that took some retrofit to make sure it is locked down solid, a yard sale $10.00 BSA pistol scope and made a leather cheek riser for it.

    It loves heavy hard cast boolits and is surprisingly very accurate with same, tis my always carry truck gun.

    SSC3_op_800x366.jpg

    SSC2_op_800x311.jpg
     
  5. benEzra

    benEzra Moderator Emeritus

    Joined:
    Dec 25, 2002
    Messages:
    9,182
    Location:
    Down East in NC
    Well, flash-bangs are uber tactical, and that's a magazine-fed flash-bang, so... :D
     
  6. sargents1

    sargents1 Member

    Joined:
    Nov 25, 2009
    Messages:
    191
    Location:
    The Pine Tree State
    Some of the pictures here have left me with a question.

    When you chop a mosin nagant down so that it has a barrel length less than 16in, dont you run into trouble with the BATFE regulations on SBR's?

    As I understand it if you were to take an AR and mount a 12in barrel you would be violating the NFA...unless you pay the stamp and get fingerprinted, photgraphed and cavity searched...isnt this also true for other rifles? Is a mosin exempt because it is a bolt action with a fixed magazine or did someone really pay to get an NFA stamp on a Bubba'd Mosin Nagant SBR?
     
  7. thisisoriginal

    thisisoriginal Member

    Joined:
    Nov 9, 2010
    Messages:
    80
    Google would have helped you a lot more than asking the question in here.
     
  8. Spec ops Grunt

    Spec ops Grunt Member

    Joined:
    Oct 14, 2005
    Messages:
    1,012
    Location:
    Oklahoma
    This thread= :barf::barf::barf::barf::barf::barf::barf::barf::barf::barf::barf::barf:
     
  9. Deus Machina

    Deus Machina Member

    Joined:
    May 24, 2007
    Messages:
    3,005
    Location:
    Brandon, Florida
    They paid for a tax stamp. Because they could.

    Really, how can you not justify a tax stamp on cutting down $40 beater rifle for fun--which probably had a buggered bore and stock further down anyway--if you could for a $1200 rifle that remains in the exact same configuration minus a few inches?

    More bang for your buck. In this case, literally.

    You other guys, thanks for your... constructive comments. ;)
     
  10. Qobsession

    Qobsession Member

    Joined:
    Nov 29, 2010
    Messages:
    7
    Location:
    Fort Lauderdale
    I am building this one. I love the way he created his Break. Now I am on the hunt for a Mosin with a good bore, none matching serial numbers, for dirt cheap of course. Anyone know where I can get an already bubbaed Mosin for less them 90 buck in Florida? (how do we spell Bubbaed?). I can get a perfect Mosin at the Gun show for $125 to $150 They are too pretty to cut the barrel. Oh I will use a regular 91/30

    I am only going to cut the barrel down to 22 inch though.

    http://www.youtube.com/watch?v=4GeV9xqLqp4
     
  11. henschman

    henschman Member

    Joined:
    Nov 13, 2010
    Messages:
    2,880
    Location:
    Oklahoma City
    God damn mad max rifles in this thread!
     
    Last edited: Dec 30, 2010
  12. Cob

    Cob Member

    Joined:
    Jan 6, 2011
    Messages:
    445
    Location:
    North FL Woods
    qobsession -

    You can get the 91/30's from J & G sales, Aim Surplus, Rguns, maybe a few other places for $69 - 79.00, if you have a C&R.-Shipping to FL is about 10-15 bucks/rifle, and if you don't have a C&R, then a FFL transfer will cost you about 15.00 - 35.00 depending on broker... Buy several at a time, and the transfer fee can be split per rifle. I'm going to order several this week., in North Florida.
     
  13. RonE

    RonE Member

    Joined:
    Aug 19, 2007
    Messages:
    696
    Location:
    Rockport, Texas
  14. Qobsession

    Qobsession Member

    Joined:
    Nov 29, 2010
    Messages:
    7
    Location:
    Fort Lauderdale
    Cob I wish you were closer
     
  15. Qobsession

    Qobsession Member

    Joined:
    Nov 29, 2010
    Messages:
    7
    Location:
    Fort Lauderdale
    RonE I am sorry your thread was killed. I was hoping more people would begin to post there modified mosin on your thread. I will be purchasing a Butt pad from the same place you got yours. It amazes me how people don't understand what we are doing. I don't want and expense gun. I want something I can play with and improve its fun, and does not hurt the pockets. When I am finish I will have $300 into it Scope $100 and bended bolt $65 and all the free mods. I will be out shooting the guys with the $700 dollar plus guns. Many people are shooting Mosin at 400 to 1000yards with out issue. It is more then accurate enough for responsible hunting of any North American Animal. Continue to enjoy yourself.

    http://www.chuckhawks.com/practical_accuracy.htm
     
  16. russian762x54r

    russian762x54r Member

    Joined:
    Mar 10, 2011
    Messages:
    7
    Location:
    Auburn, wa
    Here's a few pictures of my Russian m38 to bring this thread back to life. First we have the nail polish 3 dot sight, then the stock showing inletting for the Timney trigger, the rifle in its current configuration and a pic of 2 actions with stock trigger and a timney side by side. I love the trigger, it has no slop and breaks extremely cleanly at 2.5 lbs.
    Bedding the action and floating the barrel are next. Then some better sights or the rocksolid mount and a decent scope. I have an extra bolt I'll weld up into a bent bolt should I decide to scope this thing. Considering I got the bipod and stock as part of a trade I'm into it about 275 so far. The trigger was about 100 shipped and the bedding was 25 or so. I paid 150 for the rifle. I may sell the original stock for 20-30 bucks to recoup a little.
     

    Attached Files:

    Last edited: Mar 24, 2011
  17. shadow9

    shadow9 Member

    Joined:
    Feb 8, 2011
    Messages:
    300
    Gotta say, old post in referendum, but Wow, Cosmo, that M39 is pure BEAUTY. I remember fondly looking from that POV for a while...wish it didn't get stolen. Will get another...
    Also love the "Tactical Advantages" writeup - very pro! :p
     
  18. AuthorityDenied

    AuthorityDenied Member

    Joined:
    Oct 10, 2010
    Messages:
    105
    Location:
    NY's Capital District
  19. shadow9

    shadow9 Member

    Joined:
    Feb 8, 2011
    Messages:
    300
    I want one...o.o;;
     
  20. Biohazard1993

    Biohazard1993 Member

    Joined:
    Oct 26, 2011
    Messages:
    124
    I have a couple questions. I have a mosin but am planning on buying an m44 carbine.:cool:

    1. Will a sporter stock still alow the full use of the side folding bayonet.:confused:

    2. I had seen in one place which now excapes me that there is a synthetic stock and hangaurd in the stock mosin configuration (long, sling cuts, barrel bands, cleaning rod hole, ect ect) I was wondering if anyone has seen it and some links to it. All I can find is the ATI sporter stock:cuss: and have looked for the other for quite some time without any fruit.

    3. Does anyone have a good link for an origonal, metal, ten round trench mag for the mosin nagant. I hear the best place to find is a gun show but I find it hard to get out to them. I figured this would be the best place to ask this perticular question without people asking me why I need a ten round mag for hunting;) (when I did not even say that is what the firearm is being kept for) Other than that i do not want to change anything else. Thanks a bunch.:D
     
  21. jogar80

    jogar80 Member

    Joined:
    Aug 31, 2009
    Messages:
    564
    Location:
    Brownsville, Tx
    Is that a 2x4 with a barrel and a scope?? :D LOL... j/k... looks kool ;)
     
  22. LJ-MosinFreak-Buck

    LJ-MosinFreak-Buck Member

    Joined:
    May 19, 2008
    Messages:
    2,791
    Location:
    Council Bluffs, Iowa
    I like that one too, jogar, lol. I might do one like that down the road as well, haha.
     
  23. Chris-bob

    Chris-bob Member

    Joined:
    Oct 6, 2011
    Messages:
    351
    Location:
    Ketchikan, Alaska
  24. LJ-MosinFreak-Buck

    LJ-MosinFreak-Buck Member

    Joined:
    May 19, 2008
    Messages:
    2,791
    Location:
    Council Bluffs, Iowa
    Though, if you think about it, all Mosin Nagants are tactical. They were all used by an army at some point in their lives. That, to me, is tactical.
     
  25. Gunnerboy

    Gunnerboy Member

    Joined:
    Jun 20, 2011
    Messages:
    1,136
    Location:
    Over the hills and far away
    I agree ^ look at the m44 its the ultimate in tacticality its got a hot dog holder on the front the safety can be used as a bottle opener, the steel buttplate is good for cracking anything or being used as a hammer, and they already have a mag release for quick ammo changes :neener:
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice