Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

powder funnel ?

Discussion in 'Handloading and Reloading' started by kidcoltoutlaw, Sep 28, 2003.

Thread Status:
Not open for further replies.
  1. kidcoltoutlaw

    kidcoltoutlaw Member

    Joined:
    Dec 26, 2002
    Messages:
    557
    Location:
    VA
    who makes a funnel big enough to fit the 270 wsm.the ones i have been using for years are to small,thanks,keith
     
  2. Dave R

    Dave R Member

    Joined:
    Dec 26, 2002
    Messages:
    3,628
    Location:
    Idaho
    RCBS makes at least two funnel sizes. I bought one for my .17, and use it for all calibers I reload (so far) up to .308.
     
  3. 308win

    308win Member

    Joined:
    Jun 23, 2003
    Messages:
    2,918
    Location:
    Ohio - The Heart of it All
    RCBS makes one that works for my .223, .308. .357, and .45ACP. I don't know if it would work for a .17 tho as the .223 fits against the stop at the bottom of the funnel.
     
  4. Paul "Fitz" Jones

    Paul "Fitz" Jones Moderator - Emeritus

    Joined:
    Dec 26, 2002
    Messages:
    827
    Location:
    Northern Calif
    I made a bunch of them

    I made a bunch of them in the 60's and 70's and supplied most of the gun shops in the country with them. pic site below

    Paul Jones
     
  5. Standing Wolf

    Standing Wolf Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    24,041
    Location:
    Idahohoho, the jolliest state
    When I need a powder funnel, I just roll a 3" x 5" card and use a piece of tape to hold it together; the same low budget gadget works great for vacuuming nooks and crannies in computers, too.
     
  6. Okiecruffler

    Okiecruffler Member

    Joined:
    Dec 27, 2002
    Messages:
    3,351
    Location:
    Del City, Okla
    I've been using an ear trumpet borrowed from work, you know those thingy bobs that the doctor uses to look in your ears. Next time you get a check-up, grab a few, trust me, you've paid for them.
     
Thread Status:
Not open for further replies.

Share This Page