Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Price of scrap brass cartridge cases?

Discussion in 'Handloading and Reloading' started by orfeo, Dec 6, 2006.

Thread Status:
Not open for further replies.
  1. orfeo

    orfeo Member

    Joined:
    Dec 6, 2006
    Messages:
    13
    Just curious, what kind of prices are you guys getting for your scrap brass cartridge cases per pound? Best I've found around here is $1.15 per pound. Wonder what prices are around the rest of the country. . .
     
  2. ReloaderFred

    ReloaderFred Member

    Joined:
    Apr 28, 2005
    Messages:
    5,916
    Location:
    Oregon Coast
    I just sold a little over 250 pounds of scrap brass for $1.36 a pound in Salem, OR. That was about $.07 more than the dealer in Eugene. Since I was going to Salem anyway, that's where I sold the brass.

    If you have more than one scrap dealer in your area, shop around. There is no fixed price and they're like used car dealers, in reverse. They will pay what they think they can get away with, starting low. If you have enough to mess with, say a couple buckets full, then when they quote a low price, tell them you're going to the other guy, who offered you more. Sometimes it works, and sometimes it doesn't. It all depends on supply and demand, but the demand for copper, brass, aluminum and steel is way up right now.

    I was reading in Shooting Sports Retailer magazine yesterday that the ammunition companies (Winchester, Remington, Federal, etc.) are taking a big hit on raw materials. They say they've been trying to keep the price increases to a minimum, but their costs have more than doubled, so there is going to be another big price increase after the first of the year.

    Hope this helps.

    Fred
     
  3. TexasTed

    TexasTed Member

    Joined:
    May 6, 2006
    Messages:
    10
    Who buys scrap brass

    Just where do you sell scrap brass? And does it have to be sorted by caliber?
     
  4. Car Knocker

    Car Knocker Member

    Joined:
    Dec 28, 2002
    Messages:
    3,809
    Location:
    Salt Lake City, UT
    Scrap metal dealers that buy from the public - check the Yellow Pages.

    No, just has to be reasonably clean brass - no steel or aluminum cases.
     
  5. Novus Collectus

    Novus Collectus Member

    Joined:
    Nov 19, 2005
    Messages:
    909
    Location:
    Maryland
    Depends on where you live too. In my area scrap dealers that take spent brass are scarce because only a few of them have big armor plated cookers (That is how someone described it to me) that they can put the brass in to set off any unexpended cartridges that may be in the mix.
     
  6. Kali Endgame

    Kali Endgame member

    Joined:
    Jun 24, 2006
    Messages:
    516
    Location:
    In a constant state of confusion.
    If the pieces are still viable then sell them on ebay. Some of those auctions are getting stupid expensive. More than the cost of NIB.
     
  7. donttellthewife

    donttellthewife Member

    Joined:
    Aug 15, 2006
    Messages:
    302
    Location:
    Oregon
    The going price for brass in the Portland, OR area is about 1.40 a pound unless it's spent ammo cases then it's only .40 a pound. They say they have to handle it differently and can't ship it over seas to China unless it's smelted first. Sounded just like a used car salesman to me, I won't be going back to Metro Metals anytime soon. I have been told that ammo that's cooked off from heat alone won't have any great speed to the shrapnel thus there would be no need for an armor plating.

    If the brass has any life in it sell it to reloaders. It's a sin to keep good cases form becoming a loaded round again. Heck I even reload bedan cases in 308, 7,5x55, 7,62x39 and would reload berdan 223 if I could find small rifle berdan primers
     
  8. rangermonroe

    rangermonroe Member

    Joined:
    Jan 30, 2006
    Messages:
    250
    Location:
    savannah, ga
    I just got .$80 / lb, day before yesterday. Better than a sharp stick in the eye, but I had hoped for a bit more.
     
  9. papabear47

    papabear47 Member

    Joined:
    Sep 25, 2006
    Messages:
    14
    Location:
    West central Illinois.
    Scrapping brass

    Got .80 cents a pound in August.Sold 174 pounds yesterday at the same scrap yard for 1.10 per pound when the owner recognized me.This was all brass that was damaged or heavily reloaded.I pick it up at my pistol/rifle range all year long.
     
  10. trickyasafox

    trickyasafox Member

    Joined:
    Dec 22, 2004
    Messages:
    2,523
    Location:
    upstate NY go to school in WNY
    i have been meaning to sell mine, but if i had 30-35lbs i'd be suprised. i think i'll wait until i get a bit more, and instead of cash maybe i'll see if i can get them to trade me lead at a better price? might not be a bad way to get into casting. seems kinda painless.
     
  11. orfeo

    orfeo Member

    Joined:
    Dec 6, 2006
    Messages:
    13
    Sounds like my $1.15 isn't that bad after all I guess. . .
     
  12. ReloaderFred

    ReloaderFred Member

    Joined:
    Apr 28, 2005
    Messages:
    5,916
    Location:
    Oregon Coast
    Donttellthewife,

    Next time you have some brass to sell, take it down to Salem, to Cherry City Recycling, and get top dollar for it. The owner is honest. The current price is a little over $1.40 a pound there.

    Hope this helps.

    Fred
     
  13. Alvin in AZ

    Alvin in AZ Member

    Joined:
    Oct 19, 2006
    Messages:
    76
    Location:
    Venta de la Mesilla
    I'm getting $1 a pound but it goes both ways they sell it to me for a $1 pound too.* :) Last time I was there they had half a dumpster load of 30-06 308 and 223 only... guessed it was from the local Air Base... but it was only partly military stuff (LC) mostly R-P and FC. (?)

    *got any 30-30 boxes? ;)

    Alvin in AZ
     
Thread Status:
Not open for further replies.

Share This Page