Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

question for sks owners

Discussion in 'Rifle Country' started by JBrady555, Nov 14, 2012.

Thread Status:
Not open for further replies.
  1. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    Hey guys I haven't had a chance to shoot my newly aquired sks yet but I had a question. I noticed that you have to have the bolt open to load a mag, no problem there. I put a loaded mag in the gun and pulled the bolt back and let it go to cycle the first round. I then pulled it back and released it several more times to familiarize myself with it a little bit. After that I wanted to take the mag out and clear the gun of the chambered round, but apparently you can't remove the magazine without the bolt being open. Does that mean that this gun has to be shot out of ammo or manually cycled out of ammo just to remove a magazine? Doesn't seem like this should be the only way to clear the gun to me. Let me know if I'm wrong, this is my first sks.
     
  2. Sam1911

    Sam1911 Moderator

    Joined:
    Oct 22, 2007
    Messages:
    34,695
    Location:
    Central PA
    What kind of magazine are you using? Most SKSs use a fixed 10-round mag, so you've either got one of the few that were set up to use AK mags, or you're using an aftermarket "duckbill" detachable magazine. They're a little finicky, but you should be able to remove one without having to lock the bolt open.
     
  3. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    yea they are 20 round tapco duckbills. I'll try again in a little while to get one out with the bolt closed.
     
  4. primalmu

    primalmu Member

    Joined:
    Jul 31, 2012
    Messages:
    951
    Location:
    Tucson, AZ
    Your issues are a result of using the duckbill mags instead of the fixed mag it was designed for. My advice would be to find a fixed mag. It will be more reliable anyway, and if you just HAVE to have a 30 round mag save up for an AK or AR.
     
  5. Shawn Dodson

    Shawn Dodson Member

    Joined:
    Dec 28, 2002
    Messages:
    2,339
    Just wait until you try to clear a malfunction with that duckbill magazine installed. You'll need four hands!

    I purchased an SKS "paratrooper" that somebody had fitted with the 20 rd Tapco duckbill magazine. I posted a "WTB" ad and found an original, fixed 10 rd metal SKS mag, which is currently installed.

    Good luck!
     
  6. Cee Zee

    Cee Zee member

    Joined:
    Aug 23, 2012
    Messages:
    3,297
    It's not hard at all to remove a half full mag even with the duckbill install. Just pull the bolt back half way and release the catch that holds the mag and pull it out. It's tricky and whatever you do, don't let go of that bolt if you have a round already chambered and stuck maybe. You could get a big surprise. But I've done this many times and I'm still alive. If you're really paranoid stick something in front of the bolt to keep it from moving forward while you remove the mag. You can pull the bolt all the way back and take the mag loose but you increase your chances that the bolt will pick up a second shell and try to stuff it in the chamber which is not good if you have a round stuck in the chamber.

    I suppose this stuff is more tricky than most rifles. But in 20 plus years of shooting I probably haven't had half a dozen stuck rounds. That's with me firing at least 10,000 rounds through the rifle

    BTW with the standard SKS mag you hit that same release and the mag dumps all your rounds from the mag. You only have what's left in the chamber still in the gun.
     
  7. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    I have a AR and a AK already.

    The pawnshop that does all my transfers actually has a stock fixed mag down there, I think I'm gonna go pick it up tomorrow. Plus the guy I bought the sk from included a bunch of stripper clips, I'm sure it'll be just as fast or probably faster to use those.
     
  8. Cee Zee

    Cee Zee member

    Joined:
    Aug 23, 2012
    Messages:
    3,297
    If you can get them to work right they're faster. They're much lighter to carry around too.
     
  9. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    are they difficult to get to work flawlessly?
     
  10. Onward Allusion

    Onward Allusion Member

    Joined:
    Mar 22, 2009
    Messages:
    3,388
    Location:
    IN between
    Stripper clips work best with SKS's. I had a 20 rounder fixed mag Norinco and it loaded fast. Almost as fast as an AK.
     
  11. jim243

    jim243 Member

    Joined:
    Sep 11, 2009
    Messages:
    1,992
    It takes some practice to get use to using them. Just don't mount a scope over your bolt unless it is a real short scope.

    Jim
     
  12. Cee Zee

    Cee Zee member

    Joined:
    Aug 23, 2012
    Messages:
    3,297
    I have had all sorts of problems getting them to work but I guess once you get them going they work well. I haven't tried all that hard I guess. I should have been trying to make them work but mine won't fit through the slot for some reason. I know some clips are better than others.
     
  13. Texan Scott

    Texan Scott Member

    Joined:
    May 2, 2012
    Messages:
    3,184
    Location:
    The Texas Hill Country
    Cee Zee described exactly how to solve your little problem. He also highlights exactly why you have a much bigger problem than the little one. Convenient carry and reliable function are great, but you have a high powered rifle THAT YOU CANNOT SAFELY CLEAR OR HANDLE when it jams.

    Seriously... get a fixed magazine that works, and use strip clips.
     
  14. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,610
    Location:
    Northwest Washington
    Ok, why not just keep the Tapco in place and use it as a 20rd fixed mag?? All you have to do is cut a small notch for the stripper clips. It works great, I had one that I set up this way.
     
  15. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    how would that work. I've never used a stripper clip before. Wouldn't the 20 round mag be too deep for a small 10 round stripper clip. I probably sound dumb being as I have no experience with this gun.
     
  16. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,610
    Location:
    Northwest Washington
    You do this, problem solved. Can be done with a file, Dremel, flush cutters, pocket knife, etc. Stripper clips just go down to the top of the mag, not inside it. You just use 2 10 rd strippers for this mag. Here's a pic. Just saved you money:D.
     

    Attached Files:

  17. primalmu

    primalmu Member

    Joined:
    Jul 31, 2012
    Messages:
    951
    Location:
    Tucson, AZ
    https://www.youtube.com/watch?v=56gh2KlyCrE
     
  18. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    Wouldn't I still see reliability issues with the 20 round tapco mag even if I was using it in the fixed position. I would still have no way to clear the mag without shooting it out or manually cycling. Am I right or wrong here?
     
  19. JBrady555

    JBrady555 Member

    Joined:
    Nov 23, 2011
    Messages:
    742
    Location:
    Panama City, FL
    the guns previous owner said he couldn't get a loaded mag out of the gun with the bolt closed either
     
  20. Texan Scott

    Texan Scott Member

    Joined:
    May 2, 2012
    Messages:
    3,184
    Location:
    The Texas Hill Country
    Yes, you'd still have the same safety problem. Get a fixed ten round of the type for you rifle, ans use that.
     
  21. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,610
    Location:
    Northwest Washington
    The Tapco mags generally work as well as the factory 10 round (thats why they have great reviews everywhere). They are not like the cheapo steel banana mags. There is no safety issue, if you load a gun, you simply clear it by firing or pulling the bolt back and lifting the bolt catch into position. Very simple and not any less safe than Garand thumb. I fail to see any safety issues, dont pull the trigger, rifles doesnt fire, very simple. I for one never load a rifle unless I need it available for use (though many of my guns, both rifles and handguns are loaded all the time, an empty gun is a club or hammer).
     
    Last edited: Nov 15, 2012
  22. Lucifer_Sam

    Lucifer_Sam Member

    Joined:
    Aug 1, 2011
    Messages:
    177
    The original SKS internal magazines have lips that the bolt rides, and its locked over the mag when the bolt is closed. I guess the tapco have the same lips.
     
  23. jim243

    jim243 Member

    Joined:
    Sep 11, 2009
    Messages:
    1,992
    The original 10 round fixed magazine for the SKS works much like any hunting rifle and drops down like a trap door rifle. When you activate the mag release on the original mag the rounds just fall out and clears the magazine, you can then pull back the bolt and eject any round still in the chamber.

    The bolt has a cut out on top of it for the stripper clips to fit in, Yes that is what that cut out on the bolt is for. And it takes a little practice to push the rounds in a stripper clip down into the fixed mag, but it is not that hard to get use to it. Also do not block the cut out on the bolt with a scope or you will not be able to fit the stripper clips into the cut out.

    Jim
     
  24. HJ857

    HJ857 Member

    Joined:
    Jun 14, 2007
    Messages:
    577
    Lucifer Sam has it about right. The standard SKS bolt has lips that ride into the magazine and locks it in place. It is not possible to insert or remove a magazine with the bolt closed on a standard SKS.

    The SKS-D (that takes the AK mag) has a modified bolt where the lips/rails have been removed so a mag can be inserted and removed with the bolt closed - just like how a real modern rifle works.

    There is a bolt modification that is a common modification that can be done relatively easily and is well documented on the SKS Board.

    If you plan on using the fixed 10 round mag and stripper clips, then the bolt mod is a waste of time.

    On the other hand, IF you use detachable mags and IF you use the rifle in a more modern, fighting carbine sense, then the bolt mod is a must. Shooting to bolt lock and never tac loading is old thinking.
     
  25. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,458
    Location:
    East Texas
Thread Status:
Not open for further replies.

Share This Page